Forged Ti6AL4V ELI Gr23 Medical Titanium Round Bar for Bone Nail Implant

Product Information of GR5 ELI titanium bar

Material: GR5 ELI, GR23

Standard: ASTM F136

Diameter: 3mm, 4mm, 5mm, 6mm, 8mm, 10mm, 12mm, 16mm, 20mm etc.

Length: 1000mm, 3000mm, 6000mm or as per your request

Surface: Polishing, Pickling, Sand blasting

Third-Party Tests: BV, SGS, TUV etc.

Medical Grade Titanium

Because titanium resists corrosion and has an innate ability to connect with human bones, it has become a staple of the medical field. From surgical titanium instruments to orthopedic titanium rods, pins and plates, medical and dental titanium has truly become the fundamental material used in medical industry.

Titanium’s high-strength to low-density ratio is one of the main advantages in the field of medicine. Titanium medical equipment offers the same amount of strength as its steel counterparts but is almost 50% lighter, making it easier for surgeons to carry out delicate procedures.

Application of GR5 ELI titanium bar

GR5 ELI titanium bar can be used to replace joints – be it shoulders, knees, hips, elbows – or to repair broken bones. When reconstructing body parts, titanium is the first choice of surgeons for its biocompatibility and innate ability to connect with human bone and tissue. It can also be used to protect the vertebrae after invasive back surgery.
Titanium gives surgical instruments a longer service life. Offering resistance to bacteria, titanium medical equipment can be used for various procedures, including those that emit radiation.
Our titanium bar can be used to create medical devices such as:

• Dental scalers

• Eye surgery equipment

• Retractors

• Surgical forceps

• Surgical needle holders

• Tweezers

Crucially GR5 ELI titanium bar is not rejected by the human body – it's biocompatible. It's also non-ferromagnetic, so patients with titanium implants can still be safely examined with MRI and NMRI scans.

Other titanium Common Grades:

Titanium Grade 1 is an unalloyed, low strength titanium product containing low oxygen with high formability; this titanium grade is used in airframes, heat exchangers and desalination units.

Titanium Grade 2 is an unalloyed, medium strength titanium product. This titanium grade is used in airframes, aircraft engines and marine parts; good weldability and corrosion resistance are its distinguishing characteristics.

Titanium Grade 3 is an unalloyed, high strength, titanium product providing excellent corrosion resistance and good weldability. This titanium grade is primarily used in airframe and aircraft engine parts.

Titanium Grade 4 is the highest strength pure unalloyed titanium product. This titanium grade is used almost exclusively for
airframe, aircraft engine parts, marine, surgical implants, hydraulic tubing. Good formability and corrosion resistance are its
hallmark.

Titanium Grade 5 (6AL-4V)is an alloyed titanium product containing 6% Aluminum and 4% Vanadium; is a medium strength product. This titanium grade is predominantly used in airframe and turbine engine parts; and for use in surgical implants. Technical Info Titanium 6AL – 4V ELI is an alloyed titanium product containing 6% Aluminum and 4% Vanadium, ELI (Extra Low Interstitial).

6AL–2Sn–4Zr–2Mo (6-2-4-2)is an alloyed titanium product containing 6% Aluminum, 2% Tin, 4% Zirconium, 2% Molybdenum.

6AL–6V–2Sn (6-6-2)is an alloyed titanium product containing 6% Aluminum, 6% Vanadium, 2% Tin.

5AL–2.5Sn & ELI (5-2.5)is an alloyed titanium product containing 5% Aluminum and 2.5% Tin. Also ELI (Extra Low Interstitial).

8AL–1V–1Mo (8-1-1)is an alloyed titanium product containing 8% Aluminum, 1% Molybdenum and 1% Vanadium.

15V–3Cr–4AL–3Sn (15-3-3-3)is an alloyed titanium product containing 15% Vanadium, 3% Chromium, 4% Aluminum, 3% Tin.

Titanium bar UT test (Ultrasonic Testing )

Professional third-party testing

7. Cooperation with us will provide you a strong guarantee:

1.ISO9001:2015
2. The timely delivery rate is 99.8%, sometimes in advance.
3.Excellent after-sale service.
4.Rapid inquiry reply, within 2 hours.
5.Fair payment term
6.Professional technical adviser
7.Material certificate
8.Quality is strictly according to ASTM,DIN,UNS,GB/T standard(manufacturing process,surface treatment,inspections and testing).