MF Electromagnetic Flowmeter
- The flow measurement range is wide, and the range ratio is 1500:1.
- The flow rate of minimum guaranteed accuracy is 0.2m/s.
- Advanced sensor technology can ensure that the installation of straight pipe section takes only 1.6D.
- High accuracy: up to 0.2% indicating value
- Forward and backward flow are measurable: pulse flow, multiphase flow and slurry are measurable.
- The input of the converter is more than 1012 ohms, which can effectively prevent the influence of scaling on the sensor, and the minimum conductivity can reach 1.7us/cm.
- The electrode seal adopts a unique double-sided sealing method of cone seal and line seal.
- Buried installation and long-term immersion installation are allowable, up to IP68.
- Multi-frequency excitation technology/DSP digital processing technology/high frequency sampling technology/data coordinating analysis technology
- Self-diagnosis (excitation circuit/empty pipe detection/upper and lower limits/system storage)
Main Ttechnical Pparameters:
Diameter (mm) | DN2.5-DN2400 |
Communication protocol | PROFIBUS bus / FF bus / HART bus / MODBUS bus |
Explosion proof grade | Exia/deⅡCT4-T6 Ga/Gb |
Basic error | ±0.2% or ±0.5% of the indicating value |
Protection level | IP65/IP67 (sensor IP68 optional) |
Ambient temperature | -40°C~65°C |
Power supply | ACAC (100-230) 士1 5%V, 47Hz-440Hz, maximum Power consumption is 20VA; DC 11V-40V, maximum power consumption is 20VA, and power consumption of two-wire system is 0.5VA |
Functional type | two-wire system/slurry system/sanitary system/quick response system/plug-in system/battery-powered system/nuclear power system |
Application Scenarios:


