ADVANCED SENSOR PIPE SECTION MULTIPHASE FLOW CONE SEAL MF ELECTROMAGNETIC FLOWMETER
Main Ttechnical Pparameters:
Flow Master MFE-S type electromagnetic flowmeter | ||
One type | split type | |
Basic error | ± 0.2% or ± 0.5% of the indicated value | |
caliber (mm) | DN2.5~DN2400 | DN2.5~DN2400 |
flange | Comply with gb9119 standard, carbon steel (optional stainless steel) | |
Pressure class | DN2.5~DN600 1.0 1.6 2.5 4.0MPa DN700~DN2400 0.6MPa The special pressure shall be determined through consultation with the company | |
Lining material | PTFE polytetrafluoroethylene, polyurethane rubber, PFA, F46, natural rubber, neoprene, ETFE | |
conductivity | ≥5μS/CM(Less than ≥ 5 μ S / cm negotiates the order with our company ) | |
electrode | 316L, Hastelloy, titanium, tantalum, platinum iridium alloy, tungsten carbide | |
Degree of protection | IP65 | IP65(Sensor optional IP68) |
Medium temperature | -25℃~80℃ See lining material selection for details | -25℃~140℃ See lining material selection for details |
ambient temperature | -25℃~60℃ | |
Influence of ambient temperature | <±0.1%/10℃or<±0.25%/10℃ | |
Repeatability and repeatability | ≤±0.1%or±0.25% | |
Analog output error | ≤±0.02mA | |
Measuring range flow rate | ≤20m/s | |
Embedability | ------------ | ≤5m(Only IP68) |
Electrical connection | M20*1.5Sealing sleeve,G1/2,NPT1/2 | |
Sensing cable | ------------ | If it is too long, you need to negotiate with our company to order |
Output interface* | Standard output (pulse + 4 ~ 20mA single current output), dual current output, RS485,HART,Profibus-PA |
Note*: 4-20mA analog output is active output
Application Scenarios: