ADVANCED SENSOR PIPE SECTION MULTIPHASE FLOW CONE SEAL MF ELECTROMAGNETIC FLOWMETER

• The flow measurement range is wide, and the range ratio is 1500:1.
• The flow rate of minimum guaranteed accuracy is 0.2m/s.
• Advanced sensor technology can ensure that the installation of straight pipe section takes only 1.6D.
• High accuracy: up to 0.2% indicating value
• Forward and backward flow are measurable: pulse flow, multiphase flow and slurry are measurable.
• The input of the converter is more than 10¹² ohms, which can effectively prevent the influence of scaling on the sensor, and the minimum conductivity can reach 1.7us/cm.
• The electrode seal adopts a unique double-sided sealing method of cone seal and line seal.
• Buried installation and long-term immersion installation are allowable, up to IP68.
• Multi-frequency excitation technology/DSP digital processing technology/high frequency sampling technology/data coordinating analysis technology
• Self-diagnosis (excitation circuit/empty pipe detection/upper and lower limits/system storage)

Main Technical Parameters:

Product performance

·The simple measured current output is used to display the flow, and the pulse output is used to drive the external accumulator or as the status output

·Can ensure the reliability, safety and stability of measured values of all basic functions

·The optimized process control accuracy is + 0.5%

·PTFE lining ensures maximum corrosion resistance and temperature resistance up to 130 ℃

·It can be assembled under most difficult conditions (such as shaft, vibration or long-term underwater). The sensor can be installed independently without sensor, and the protection level is IP68

·The functional design makes maintenance simple and easy. Hart, fieldtool and fieldcheck provide support for equipment verification, so there is no need to move the sensor

Application Scenarios: