Product advantage

1) Using the world's most advanced second generation transmitter technology - DSP technology, higher precision, wider range, more simple structure, more stable operation.

2) Measurement of high pressure gas (such as CNG compressed natural gas (LNG), low temperature liquids such as liquefied natural gas, liquid nitrogen).

3) Using high-precision processing technology, ensure the sensor quality, zero stability.

4) Using digital signal processing (DSP) technology, metering system host through the 485

communication, the relevant parameters, to obtain the required such as: mass flow, volume flow rate,temperature, density, the state information.

5) Through the debugging software or manual debugging device can read the fault code, solving the problem of inconvenient meter using the staff more comprehensive, troubleshooting

6) Support the standard industrial control communication protocol ModbusRTU, easy configuration and use.

7) According to user needs, mass flowmeter in design and manufacture of special specifications and has special function, tailored to the user.

Measuring principle

1) The principle of measuring flow based on rule of Coriolis Motion.

2) After transmitter connecting with sensor, time difference was measured by signal of velocity sensor, then calculate mass flow value by mass circulation calibration coefficient.

3) Transmitter is used to make stream tube resonant, measure mass and density parameters .etc according resonance frequency.

Temperature specification in hazardous zone

The Coriolis Mass Flow Meter could be installed indoor or outdoor.

Do not exceed the max pressure indicated on nameplate.

Installation Mode

Workshop and warehouse

Sold mass flow meter coriolis sanitary type

Installation diagram

International Certificates