Single-pole stepper motor 24mm diameter permanent magnet stepper motor with gearbox
This motor is mainly used for sanitary ware, thermostatic valve, hot water faucet, water temperature, flow automatic adjustment.
At the same time, other areas requiring precise control can also be achieved. Because of the open loop control, low cost position control is realized.
Applied to gas valves, water purifier valves, instruments and other automation control field precision control.
At the same time, the external wiring part can use various types and lengths of connection cables, or FPC FFC, according to customer requirements.
Output components can be used in a variety of ways, such as gears, belts, V-grooves and turbo screws.
The shape of the mounting plate and the Angle of the socket can be adjusted according to the needs of the customer!
If you can write to me, our products can be customized.
Mechanical Dimension:MM
Specifications
Motor Diameter | 24 mm |
Rated Voltage | 12 V DC |
Resistance (25℃) Ω phase ±8% | 70ohm |
Step Angle | 11.25°/32 |
Reduction Ratio | 32:1(16:1, 25:1, 48.8:1, 64:1, 85:1) |
Pull-in Torque | ≥58.8mN.m |
Custom Torque | ≥29mN.m |
No-load pull-in frequency | ≥500HZ |
No-load pull frequency | ≥800HZ |
Insulation Resistance DC.500v | ≥10 |
Insulation Dielectric strength | No breakdown or flying fox |
Temperature Rise 400HZ 3 min | ≤60K |
Noise | ≤45dB(A) |
Near Shanghai port, the traffic is very convenient.
Type of Fixture Cover
The regular models are shown in the figure, and the special sizes can be customized.
Motor input method with Pin type, FPC, PCB, Lead wire etc.
These can be customized according to customer needs.