SM15-80L-S is a precision stepper motor with a 15mm plastic screw slider. The distance between the output shaft and the guide screw is 0.4mm.
The basic step angle of the motor is 18 degrees, and it runs 20 steps per week. The displacement resolution can reach 0.02mm, achieving precise control.
The executing agency adopts a segmented driving method to meet the requirements.
Exquisite design: This guide rail and linear block have a small volume and light weight, making them particularly suitable for small teams. This tool is easy to use, sturdy and durable.
Can be used for DIY small sliders/projects/equipment measurements/laser printers.
It adopts advanced technology and fine craftsmanship, and is an essential linear motion component.
Metal sliders can also be chosen instead of plastic sliders.
Intelligent Security Products
Camera Lenses
Door Locks
Wearable device
Product Name | 15mm micro stepper motor | |||
Model | SM15-80L-S | |||
Rated Voltage | 12V DC | |||
Coil Resistance | 15±10% ohm/PHASE(20℃)) | |||
No.Of Phases | 2 Phases | |||
Step Angle | 18°/Step | |||
Current Per Phase | 800mA/Phase | |||
Drive Mode | Bipolar Drive | |||
Pull-out-Thrust | More Than 230 g AT 125PPS | |||
Max Response Frequency | More Than 1300 PPS | |||
Max Starting Frequency | More Than 900 PPS | |||
Insulation Class | CLASS E FOR COILS | |||
Insulation Strength | 100V AC FOR ONE SECOND | |||
Insulation Resistance | 50mΩ(DC 500 V) | |||
Operating Temperature | -0~55℃ | |||
Motor surface temperature | 80℃ or less |
Competitive Advantage
Motor input method with Pin type, FPC, PCB, Lead wire etc.
These can be customized according to customer needs.
The regular models are shown in the figure, and the special sizes can be customized.