8mm linear stepper motor actuator screw slider 2 phase stepper motor for precision medical devices

VSM0825 is a precision micro 8mm diameter stepper motor with a screw pitch of 0.4mm on the output shaft, which is supported by the screw and rotates into thrust.
The basic step angle of the motor is 18 degrees, and the motor runs 20 steps per week, so the displacement resolution can reach 0.02mm, achieving precise control.
The actuator adopts a subdivision driving method to meet the requirements.
The output part of the motor includes connecting wires, FPC, and bare needles, which can be customized according to customer installation requirements

Mechanical Dimension:MM

Technical Features

Because of its small size, high precision, easy to control and other excellent characteristics, so this micro stepper motor is widely used in the camera, optical instruments, lenses, precision medical devices, automatic door locks and other fields.
The motor input part of the FPC, but can according to the customer demand can be changed to a connecting line needle, PCB and other forms.
The mounting bracket can be changed according to the customer's request.

Typical Applications

• Intelligent Security Products

• Camera Lenses

• Door Locks

• Wearable device

Specifications

Competitive Advantage

• High quality and the best price.
• Fast deliver,storage company and rich inventory
• Near Shanghai port, the traffic is very convenient.

Torque Curve For Reference

Type Of Wire Connect For Reference

Motor input method with Pin type, FPC, PCB, Lead wire etc.

These can be customized according to customer needs.

Customization service:

Motor’s design can be adjusted based on customer’s requirement including:

Motor’s diameter: we have 6mm, 8mm, 10mm, 15mm and 20 mm diameter motor

Coil resistance/ rated voltage: coil resistance is adjustable, and with higher resistance, motor’s rated voltage is higher.

Bracket design/ lead screw length: if customer want the bracket to be longer/short, with special design such as mounting holes, it’s adjustable.

PCB + cables + connector: PCB’s design, cable length and connector pitch are all adjustable, they can be replaced into FPC if customers require.