VSM0632 is a precision micro stepper motor with a body diameter of 6mm and a body length of 6mm. The motor comes with a bracket and a metal slider,
Because of its small size, high precision, easy control and other excellent characteristics, the micro stepping motor is widely used in cameras, optical instrument, lenses, precision medical equipment, automatic door locks and other fields.
The motor input part of FPC can be changed to wiring pins, PCBs, and connecting wires according to customer needs.
The installation bracket can be customized according to customer requirements.
Intelligent Security Products
Camera Lenses
Door Locks
Wearable device
Projector
Product Name | 6mm micro stepper motor | |||
Model | VSM0632 | |||
Rated Voltage | 4.6V | |||
Current Per Phase | 100 mA /phase | |||
Coil Resistance | 40Ω±7% | |||
No. Of phase | 1-2 Phases | |||
Step Angle | 9 degree | |||
Excitation Method | 1-2 Phase Excitation | |||
Drive Mode | Bipolar Drive | |||
Pull-Out Torque | 36 g min,At 500 pps | |||
Max. Response Frequency | 1100 pps,At 4.6VDC | |||
Max. Starting Frequency | 2000 pps,At 4.6VDC | |||
Insulation Class | Class E for Coils | |||
Insulation Strength | 300 V AC for One Second | |||
Insulation Resistance | 1.0 MΩ (DC 100 V) | |||
Operating Temperature Range | -10~+60℃ | |||
Weight | 3.5 g(Ref.) | |||
OEM & ODM SERVICE | AVAILABLE |
Competitive Advantage
Motor input method with Pin type, FPC, PCB, Lead wire etc.
These can be customized according to customer needs.
Customization service:
Motor’s design can be adjusted based on customer’s requirement including:
Motor’s diameter: we have 6mm, 8mm, 10mm, 15mm and 20 mm diameter motor
Coil resistance/ rated voltage: coil resistance is adjustable, and with higher resistance, motor’s rated voltage is higher.
Bracket design/ lead screw length: if customer want the bracket to be longer/short, with special design such as mounting holes, it’s adjustable.
PCB + cables + connector: PCB’s design, cable length and connector pitch are all adjustable, they can be replaced into FPC if customers require.
Lead time and packaging information:
Lead time for samples:
Standard motors in stock: within 3 days
Standard motors not in stock: within 15 days
Customized products: About 25~30 days (based on complexity of customization)