VSM20-MG 20mm 12v micro metal gearmotor for high precision stepper motor

VSM20-MG 20mm stepper motor is composed of a miniature stepper motor with an outer diameter of 20mm and a precision metal gearbox. The deceleration ratio can be customized according to the customer's needs.

The deceleration ratio of this image is 1:35, and the torque is 800g.cm at 20RPM.This series of stepper motor deceleration ratio has:1:3 1:7 1:10 1:16 1:17 1:20 1:30 1:35 1:50 1:63 1:70 1:86 1:115 1:150 1:210 1:250 1:360

The basic stepping Angle of the motor is 18 degrees, which is 20 steps per lap. Combined with the deceleration effect of the reduction gearbox, the rotation Angle resolution of the final motor can reach 0.05~6 degrees.

The customer can select the speed reduction ratio according to different torque speed requirements, and at the same time, the appropriate driving frequency of the stepper motor can achieve the determined speed and torque.

Mechanical Dimension:MM

Typical Applications

• Saliva Analyzer
• Blood Analyzer
• Welding Machine
• Intelligent Security Products
• Fiber Fusion Splicer
• Digital Electronics

Specifications

Torque Curve For Reference

Type of Wire Connect

Motor input method with Pin type,FPC, PCB, Lead wire etc.

These can be customized according to customer needs.

Shaft Type

Out shaft standard as follows,also can customerized due to the user drawings

welcome to contact customer service for more types

• Round Type : DIA3mm. 4mm. 5mm

• D-cut Type: DIA3-D2.5 DIA4-D3 etc

• Screw Type: M3 M4 M5 Serial

• Trape Type

• I-cut Type: DIA3-I2 DIA4-I3

• Other Type: Shaft with a hole etc

Type of Fixture Cover

The regular models are shown in the figure, and the special sizes can be customized.

Product Detail Presentation