This product is mainly used for sanitary ware, thermostatic valves, hot water faucets, automatic adjustment of water temperature and water flow, etc.
At the same time, other areas that require precise control can be achieved. Due to the realization of open-loop control, low-cost position control is realized.
It is applied to the precise control of gas valves, water purifier valves, instruments and other automatic control fields.
At the same time, the external wiring part can adopt various types and lengths of connecting wires, or FPC FFC according to customer requirements.
The output part can be used in a variety of ways, such as gears, pulleys, V-grooves, and turbo screws.
The shape of the mounting plate and the angle of the outlet can be adjusted according to customer needs!
Our products can be customized, if you can write to me.
Specifications
Motor diameter | 24mm |
Rated voltage | 12V |
Resistance (25℃) Ω phase ±8% | 70Ω |
Step angle | 11.25°/32 |
Reduction ratio | 1:32 |
Pull-in torque | ≥58.8mN.m |
Custom torque | ≥29mN.m |
No-load pull-in frequency | ≥500HZ |
No-load pull frequency | ≥800HZ |
Insulation resistance DC.500v | ≥10 |
Insulation dielectric strength | No breakdown or flying fox |
Temperature rise 400HZ 3 min | ≤60K |
noise | ≤45dB(A) |
Near Shanghai port, the traffic is very convenient.
Type of Fixture Cover
The regular models are shown in the figure, and the special sizes can be customized.
Motor input method with Pin type, FPC, PCB, Lead wire etc.
These can be customized according to customer needs.