3.3vDC Micro Slider Stepper Motor 10mm Mini Slider Screw Linear Stepper Motor For Camera etc:

This is a precision miniature stepping motor, the output shaft has a lead screw with a pitch of 0.4mm, and the lead screw and the lead screw supported by the lead screw rotate into thrust.
The basic step angle of the motor is 18 degrees, and the motor runs 20 steps per week, so the displacement resolution can reach 0.02mm, achieving the purpose of precise control.
In terms of actuators, the subdivision drive method is used to satisfy.

This is a stepper motor equipped with a bracket, a lead screw and a relative motion slider. Mounting brackets can be replaced according to customer requirements.

Since the output shaft of the motor is a lead screw, during the rotation of the lead screw, the lead screw drives the slider to move back and forth. This conveniently provides actions such as forward and backward. In addition, the stepping motor can precisely control the speed, the number of revolutions, etc., which also determines the movement speed of the slider, and the movement position is accurately controllable. The positioning accuracy can be controlled within 0.05mm.

Due to its excellent characteristics such as small size, high precision and easy control, this miniature stepping motor is widely used in cameras, optical instruments, lenses, beauty instruments, medical instruments, vending machines, rapid detection, precision medical instruments, automatic doors locks, etc.
The input part of the motor is FPC, but it can be changed to the form of connecting wire, PCB, etc. according to customer needs.

Main Application

1) vending machine

2) Optical instruments

3) Precision medical devices

4) beauty equipment

Other precise control application

10mm M2 lead screw slider stepper motor Specifications:

10mm stroke 40mm plastic slider stepper motor specifications and dimensions:

10mm plastic slider micro stepper motor product display:

Product Usage:

Customers can customize content:

1. The outer diameter of the product can be selected from 6 8 10 15 20 25mm according to the customer's use environment and space strength.

2. The outlet position of the motor can be freely selected within a range of 360 degrees to meet the installation requirements in the best state. In addition, the connector can choose lead, PCB, FPC bare pin.

2. The effective stroke of the motor can be customized within a certain range according to customer needs, mainly considering the diameter and length of the lead screw.

In general, the maximum length of M2 screws can be 50mm, M3 screws can be 100mm, and M4 screws can be 100mm. Can also do 150mm. Small motors use lead screws with too large diameters, which consume a lot of power. Therefore, customers should also consider comprehensively when selecting motors.

4. The material of the slider is generally plastic, which is easy to form and relatively cheap.

When customers have special use environment and requirements, the slider can also use metal parts.

Of course, the cost of the slider will be relatively high, which is determined according to the customer's requirements for the shape and size of the slider.

Product packaging and delivery diagram: