10mm Mini Metal Opened Worm Gear Motor 2 Phase Micro Geared Stepper Motor For Precision Instruments

10mm stepper motor attached with 1812 worm gearbox

This motor is a geared motor with a diameter of 10mm and is matched with a worm gear box. The gear box has a right-angle output of 90°, which is suitable for the installation requirements of special occasions.
The step angle of the motor is 18 degrees, that is, 20 steps per revolution. With the gear box, the final motor angle resolution can reach 0.018~0.9 degrees, which can be used in various places that require precise control.
The selectable speed ratios are 1:21 1:42 1:118 1:236 1:302 1:399 1:515 1:603 1:798 1:1030, different speed ratios will produce different final torque and speed, Customers can choose according to different torque and speed requirements. Special speed ratios can be customized, if necessary, please contact us to discuss.
When selecting a motor, it is necessary to comprehensively consider the speed and torque while meeting the requirements. The drive frequency of the stepper motor determines the speed of the motor, and the reduction ratio of the gearbox determines the final output shaft speed.
Here is a short answer formula to help customers choose a motor. Output shaft speed N(rpm)=(PPS*18/6/i). For example, a gearbox with a speed ratio of 118 is selected, the motor is driven at 800pps, and the final output shaft speed is N=800*18/6/118=20.33
Motor output can be connecting wire, FPC, bare pin, etc., can be customized according to customer needs

SPECIAL IMPORTANT REMINDER

Due to the use of the worm gear structure, the entire motor has a compact structure, but the efficiency of this structure is relatively low, so special attention should be paid when selecting it.

SM10mm-1812 worm gearbox stepper main parameters:

SM10-1812 Worm gear stepper motor out drawing:

SM10-1812 Worm gear stepper torque curve:

Since there are many speed options, the output torque can be the torque * speed ratio * efficiency of the motor, and the specific situation will generally be determined after testing the actual sample. The following is the torque curve of the SM15 stepper motor for reference.

SM10-1812 Worm gear stepper motor display:

TYPE of WIRE CONNECT:

Motor input method with Pin type

, FPC, PCB, Lead wire etc. These can be customized according to customer needs.

SHAFT TYPES:

Out shaft standard as follows, also can customized due to the user drawings

welcome to contact customer service for more types

• Round Type :DIA3mm. 4mm. 5mm
• D-cut Type: DIA3-D2.5 DIA4-D3 etc
• Screw Type: M3 M4 M5 Serial
• Trape Type
• I-cut Type: DIA3-I2 DIA4-I3
• Other Type: Shaft with a hole etc

Some informations about us:

Changzhou Vic-Tech Motor Technology Co.,Ltd( follows,we only call company) was founded in year 2011, the company mainly develops, manufactures and sells micro stepper motors, micro gearboxes, micro slider motor, micro linear motor and other products

If you are interested in our products, please feel free to contact us and look forward to the opportunity to cooperate with your company