SM24-048S permanent magnet 25mm 7.5 step angle stepper motor with gearbox
Description:
This is SM25-048S Permanent Magnet motor with a gearbox on top.
The step angle of single motor is 7.5 degrees, and it takes 48 steps to rotate one turn (without gearbox)
We have different gear ratio for you to choose, for this motor gear ratio is 10:1.
So step angle is 7.5 degrees/10
Motor Parameters:
Motor type | Permanent magnet motor with gearbox |
Motor diameter | 25mm |
Step angle | 7.5°/10 |
Phase No. | 2 |
Coil resistance | 10Ω±7% |
Pull-in torque | 600 g*cm Min (100 PPS) |
Rated current | 0.3A/phase |
Design drawing:
Product display:
Application of stepper motors:
Stepper motors are used for precise control, widely used on medical equipment, 3D printer, industrial precise control, automation equipment, etc.
Stepper motors can be used in any mechanisms requirement precise conrtol and rotational/linear movement.
Advantage of stepper motors:
Stepper motor can reach precise control even without close-loop encoders / without feed back system, also they do not have electrical brushed. Thus there is no electromagnetic interference and electrical sparks issues. In some cases, they can replace DC brushed motors/ brushless motors.
Stepper motors are easy to control with drivers, and this feature establish its important position in the field of precise control.
1. Precise control achievable, programmable
2. Without electromagnetic interference & electrical sparks
3. Small size
4. Reasonable price
5. Low noise
6. Long service life
Stepper motors are widely used among all industries.