High Speed Chemical Resistance Micro Vacuum Pump , DC12V / 24V
Specifications:
Model | PBW12 |
Type | Brushless DC micro vacuum pump |
Rated Voltage | DC12V, DC24V |
Flowrate | 320+_50mL/m for water flowrate |
Consumption current | 250mA |
Max pressure | more than 90 kPa |
Coil insulation classfication | A type |
Endurance time | more than 8000 hours |
Operating noise | Less than 20dB |
Starting voltage | 8V |
Weight | 60g |
Operating Environmental Humidity | 0-90%RH |
Brushless DC micro vacuum pump:
1. Brushless motor, super long lifetime, super quiet
2. More than 320+_50mL/m for water flowrate, can work with water or wine or oil or ozonized water flowrate or Ammonia gas or liquid. Water suctionable height 2m..
3. Speed adjustable and controllable with square wave signal
4. Corrosive resistance advanced pump film, can carry chemical liquid.
5. lifetime more than 8000hours continuously working day and night
6. size is ∮27x59.7mm
7. Outlet & Inlet Dia: 4mm
8. weight: 60g
Features
long lifetime, low noise, high quality, 320+_50mL/m for liquid flowrate and 90kpa pressure, with chemical resistance pump film, can carry any chemical liquid, RPM speed adjustable and controllable, energy saving suitable for battery driving, DC micro vacuum pump
Applications:
Electric pumps | electronic blood pressure monitor |
The monitor | The head massager |
A tourniquet | Massage goggles |
Alcohol detector | The coffee machine |
Breathing machine | Analyzer |
Ozone machine | Gas analyzer |
Beautiful leg massager | Treadmill medical apparatus and instruments, etc. |
Instructions to use air pump
1, Do not submerge the air pump into the water.
2, Air pump must be above water level
3, Do not oil any time
4, Disconnect the plug if the pump fails down
5, Clean or replace air tubble or stone regulary to abtainmaximum air outlet and longer life.
6, Make sure to use the proper valtage
Important safe guard:
Disconnect all the plugs of the electrical appliances before putting hands into the water.
We recommend that air pump and other electrical devices,should be connected to power supplies with ground fault circuit interrupters.