Wired Digital Conference System Discussion Unit Microphone
Frequency Stability | ±0.001% |
S/N Ratio | >85 dBA |
T. H. D | <0.05% |
Sensitivity | SNR>60dB @25KHz, 6dBv. |
Power Supply | AC110-240V/50-60Hz |
Max Deviation Range | ±45KHz |
Frequency Response | 45Hz-18KHz±3dB |
Operation Distance | Conventional receiving range is 60 meters |
Output | RCA socket*2, 6.35mm *1 |
Installation methods | 19-inch standard cabinet |
Weight | 5.5kg |
Dimension | 483x323x90 mm |
Power Supply | DC 24v |
RF Power Output | 15mA-60mA |
S/N Ratio | >75dBA |
Frequency Response | 100Hz-12KHz |
Type | Condenser |
polar pattern | Cardioid |
Features
GMS-5100 series is designed for simpleconference room. Itis a highly stable conference system with easy operation
. Up to 100 units can be connected to onesystem, maximum 12 chairman units. It can be expanded to 250 units withexpanding device.
. With speaking mode as FIFO,LIFO, voicecontrol, chairman mode, all on mode.
. Support central controller, Support unit hot-plug connection, Quick & portable installation
. Hyper-cardioid directional condensercapsule,1500px speaking distance, Free from interference of cellphone
Detachable design for mic tube & micbase
. Intelligent digital design control circuit, low power consumption.
. Touch the induction button to make the unit panel more integrated.
. High-fidelity unidirectional condenser microphone core, sound reproduction, high clarity and low noise.
. The delegate unit has the function of applying for speaking, and the order of the meeting is orderly and not chaotic.
. Excellent anti-interference ability from mobile phones.
. With internal magnetic high-fidelity speaker, it will automatically mute when the microphone is turned on,
and it is not easy to produce howling.
. The left side is designed with 2 3.5 audio output and input interfaces, and the access device can replace the conference
microphone to speak and listen to the content of other non-voting conference speeches.
. The conference unit supports hot-swappable function, comes with a 2.1-meter 8P cable, hand-in-hand connection mode,
easy installation and flexible operation.
. Metal base, durable, beautiful and fashionable, not fading or deforming.
GMS-5100 Rear Panel
[1]. Power Socket
[2]. 6.3mm Earphone Jack
[3]. 6.3mm Audio Input
[4]. XLR Output
[5]. Aux RCA jacks
[6]. RS-232 Port for Central Controller
[7]. RS-232 Port for PC
[8] Microphone Unit Port
Microphone unit
. With detachable design for the MIC tube and MICbase.
. Adopt hyper cardioid-directional condensermicrophone, which can carry out high quality pick up.
. With LCD display. It can display signal, batteryPower ,ON/OFF, ID relevant key indication.
. With priority button for chairman unit,With red ring indicator shows the active unit, With hyper-cardioid directional capsule.
. Free from interference of mobile.
. LCD display , Detachable mic tube
Application
Ideally suitable for small scale boardrooms and meeting rooms, Large Meeting Room, Large lecture seminar.
The various mic patterns add versatility here. The figure-8 pattern can be a great way to record two speakers facing each other, while the omnidirectional pattern is a good way to pick up general ambient sounds in your environment, in addition to your primary sound source. That the mic can also record in stereo mode is impressive: The Yeti X is a terrific tool for recording environmental/room sounds or background audio for podcasts, or recording a musical instrument or group in stereo.The internal damping the Yeti X employs keeps plosives to a minimum. Some users will still want to use a pop filter, which is never a bad idea, but the Yeti X doesn't ship with one. That's a bit of a bummer considering much of the competition does, but the Yeti X's grille-and-internal foam combo does a solid job in its own right.