Camera Tracking Pole Conference Voting 126 Units UHF Wireless Conference System
UHF Channels | UHF 4 channels |
Oscillation | PLL synthesized |
Frequency range | UHF 620MHZ-850MHZ |
Frequency Stability | ±0.001% |
Modulation Mode | FM |
S/N Ratio | >105 dB |
T. H. D | <0.7%@ 1 KHz |
Sensitivity | SNR>60dB @25KHz, 6dBv. |
Power Supply | DC 12 V-18V |
Band Width | 30MHz |
Max Deviation Range | ±45KHz |
Frequency Response | 45Hz-18KHz±3dB |
Operation Distance | Conventional receiving range is 60 meters |
Output | XLR*1, 6.35mm *1 |
Weight | 2.4kg |
Dimension | 483x323x90 mm |
Power Supply | DC 3 V (1.5 V AA battery x 2) |
RF Power Output | 15mW |
Type | Condenser |
polar pattern | Cardioid |
Weight | 1kg |
Dimension | 150*120*440mm |
Features
Introduction
● EG-7240 wireless conference system provides flexible solution for multi-purpose venue.
● It is a quick & easy job to setup the whole system with the friendly interface on the main controller's touch screen.
● The simply elegant microphone unit produces high quality timbre.
Main Feature
● Up to 1 chairman unit & 126 delegate units can work with one EG-7240M main controller
● 4 UHF audio channels support discussion for 1 chairman & 3 delegates
● Display & control: 4.3-inch capacitive touch screen, 480*272 pixels
● Support PELCO P/D, YAAN, SONY EVI-D70,BRC-Z330 camera agreement. Other agreement can be loaded under special requirement
● With voting function
●60m working distance
Microphone unit
● Professional and elegant zinc alloy Panel
● Hyper-cardioid directional gooseneck microphone
● 1.77inch TFT colorful screen, 128*160 pixels
● Red ring indicator shows working condition
EG-7240C
With priority button to cut off delegate unit.
Detachable design for Mic tube & Mic base
EG-7240D
Detachable design for Mic tube & Mic base.
Application
EG-7240 is a simple plug- and-play conference system features easy operation,
Ideally suitable for small scale boardrooms and meeting rooms, Large Meeting Room, Large lecture seminar
Capacitive typeThe condenser microphone has two metal plates, one of which is coated with electret film (mostly perfluoroethylene propylene) and grounded, the other plate is connected to the gate of the field effect transistor, and a diode is connected between the gate and the source.In order to obtain an ideal resonance frequency between 2KHz and 4kHz, the aluminum strip is made into a wrinkle to maintain an accurate tension value.As a conductor and microphone diaphragm, the aluminum strip is suspended in the magnetic field between the two magnetic pole surfaces, vibrates with the frequency of the incident sound wave, and generates a certain voltage output at both ends of the aluminum strip [2].