Microwave Drying Oven for food / Microwave Food Dryer / Drying Oven For Food

Main Features

1). High energy conversion efficiency, fast heating speed. Microwave oven itself does not heat up, but microwave energy penetrates the material, causing polar molecules in the material to rub against each other and generate heat. So there's no energy loss

2). The swelling effect is obvious. The rapid heating effect of microwave makes the water molecules in the material vaporize quickly to achieve the purpose of expansion

3). Low-temperature sterilization, less loss of nutrients. Microwave sterilization is performed under the dual effect of microwave thermal effect and non-thermal effect. Compared with conventional temperature sterilization, it can obtain satisfactory sterilization effect at lower temperature and in a short time.

4). Easy to use and operate. Microwave power and conveyor speed can be infinitely adjusted, there is no thermal inertia, it can be opened and stopped, easy to control

2. Characteristics:

Magnetron is made by Japan Panasonic Company and it can be divided into water cooling and air cooling. In addition, microwave transformer can adopt such two kinds of structures too, resulting in easy maintenance and low failure rate. There are several microwave feed in entrances in every unit of heating box and mutual interference between them is extremely slight thanks to the advanced design. Microwave signal generator is constituted by several independent power control circuits. Every magnetron is controlled independently by an overload current safeguard and it can work separately according to the clients need. There is a microwave suppresser installed at the entrance of the machine, ensuring the leakage of microwave conforms to the national safety standard. Teflon closely-woven conveying belt with guide rail is adopted, which is safe, nontoxic and works steadily. The speed adjustment of conveying belt is speed control by frequency variation. Transducer is produced by Japan Panasonic Company and it has precise control and stable performance. On the top of every unit of heating box there is a fume capture arm and flange connecting is left, which can be accompanied with clients own ventilator and xerantic system. As a result, water vapor discharged by materials of heating box can be vented in time, ensuring well drying effect.

3. Parameters: