120V 240VAC Microwave Motion Sensor Driver Remote Control Setting

120-240VAC Slim LED Driver & Microwave Sensor 2-in-1 Detector 6mHx14mD Tri-proof Light

HT20V-I is a 120-240VAC LED Driver & Microwave Sensor 2-in-1 Isolated Solution with Detahced & Slim Design with 30-50V Output Voltage and 6m(H) x 14m(D) Mounting Height and Detection Range, Remote Control Settings

Features:

1. Remote Control Setting.

2. Slim & Detached design for Tri-Proof light.

3. Abnormal protection SCP: Auto recovery, OVP, OCP, OTP.

4. Output Voltage 30-50VDC, Current 0.4A Max., Power 12-20W.

5. Max. mounting height x detection range: 6M x 14M.

6. Efficiency of 70%

Product Description

Detection Range

This figure indicates the maximum distance at the highest mounting height with 100% sensitivity.

Typical installation height 2.5-6m.

Mechanical structure

Detached Module with a remote control to set all parameters

With two DIP switch poles to choose different output current

With two installation hole, easily fixed to the lighting fixture for end user.

Wiring diagram

Two poles to connect with power supply (220-240VAC)

Two poles to connect with LED Light

Dimensions (mm)

Application Demo

1. Automatically ON/OFF function:

Light on when detect movement and off after people leave at night. Applications: Corridor, Staircase.
The daylight threshold is set to "2lux,10lux,50lux"

With sufficient daylight, With insufficient daylight, After the last detection and
even when motion detected, when motion detected, light ON. the present hold time
light remains OFF. elapsed, light OFF.

2. No daylight function
The daylight threshold is set to "Disable".
Light on when detect movement, After people leave, Light off after stand-by period.
Applications: Dim places such as Basement Parking, Underpass.

When motion is detected, After people leave the detection After the last detection and
the sensor will switch on the area, light remains 100% the present hold time
light to 100% brighteness. brightness within hold time. elapsed, light OFF.

3. Function Demo - Dimmable control/Corridor function

With sufficient daylight, With insufficient After last detection, After the stand-by
even when motion daylight, when motion light will be dimmed period, light OFF.
detected, light remains detected, light ON. down to the stand-by
OFF. dimming level (10% or

30%) after holdtime.

HT20V-I.pdf