Detached 0.3mW Automatic On Off Light Sensor Remote Control Setting

Detached Design With Remote Control 120-277VAC Microwave Motion Sensor

Features:

1. Operating voltage would be 120-277VAC 50/60Hz.

2. Have CE and RoHS certification.

3. Optional detection range,time delay and daylight threshold.

4. Compact size particularly suitable for Tri-Proof lights.

5. Loop in and loop out for easy installation.

6. Operating temperature range would be -20°C+60°C.

7. IP 20 with 5 years warranty.

8. Microwave power is less to 0.3mW.

Product Description

ON/OFF Control Dtection area Remote Control

Hold Time Daylight Threshold warranty 5 years

Detection Range

This figure indicates the maximum distance at the highest mounting height with 100% sensitivity.

Typical installation height 2.5-6 meters.

Mechanical structure

With remote controller can be set all parameters precisely.

With four poles to easily connect with LED driver and power supply

With two installation hole, easily fixed to the lighting fixture for end user.

Wiring diagram

Dimensions (mm)

The compact design is very suitable for Tri-Proof lights.

Application Demo

1. Automatically ON/OFF function:

Light on when detect movement and off after people leave at night. Applications: Corridor, Staircase.

With sufficient daylight, With insufficient daylight, After the last detection and
even when motion detected, when motion detected, light ON. the present hold time
light remains OFF. elapsed, light OFF.

2. No daylight function
The daylight threshold is set to "Disable".
Light on when detect movement, After people leave, Light off after hold time.
Applications: Dim places such as Basement Parking, Underpass.

When motion is detected, After people leave the detection After the last detection and
the sensor will switch on the area, light remains 100% the present hold time
light to 100% brighteness. brightness within hold time. elapsed, light OFF.

Installation Method:

User Notes:

1. Microwave can penetrate walls or glass thinner than 20cm and attenuate if thicker than 20cm.
2. The driver voltage shall be stable and float within 10%.
3. Detection area will be affected by speed of motion, mounting height and movement volume.
4. Conduct test on sunny days without the lampshade which will affect the tested lux value.

Attention:

1. please press "Reset" first if you want to change any setting.

2. When press any button,the light will flicker,it means the setting was recorded by sensor.