IP20 5.8GHz Microwave Switch Occupancy Sensor Ceiling Light Fixture

Rod Antenna Microwave Motion Sensor ON/OFF function installed inside of the lighting fixture

Features:

• 5.8GHz Micorwave Motion Sensor with rod antenna module for switching ON/OFF.
• With DIP Switch on front which should open a hole for adjusting the DIP switch.
• With rod antenna module which make it happen to open a very small hole with only removing 1-2 light beads to avoid any shading.
• Rod antenna design which mostly improve the stability of the sensor when installed backside of the metal board inside of the lighting fixture.
• Automatically detect the daylight and remain OFF even detect any movement when the natural light is sufficient.
• Mounting height could be 4M and detection diameter could be 12M.
• Getting different effect and requirements by selecting different detection area, hold time and daylight threshold set by the DIP switch.
• IP Rating would be IP20 and 5 years of warranty.
• Certificate of TUV, CE, RED, SAA.

Specifications:

Detection area Hold-time Daylight threshold

Detection area means Hold-time means the Daylight sensor priors

detection coverage. It Time period the light to motion sensor. Set

can be adjusted by Will be ON after the threshold for specific

combining DIP last detection. needs. If disable, only

switches for specific motion sensor works.

application.

Application Demo - Function Demo-On/off control:

With sufficient daylight, With insufficient daylight, After the last detection

even when motion when motion detected, and the present hold

detected, light remains light ON. time elapsed, light OFF.

Application:

The motion sensor can penetrate most of objects such as glass, wood, plastic but metal. It won’t be affected by ambient temperature, dust and widely applied in office, corridor.

HD011S.pdf