Detach-design Microwave Motion Sensor Switch ON/OFF Function with 120-277V controlled by remote controller

Features:

• ON/OFF function sensor with operating voltage of 120-277VAC
• Detached design which connect with DC Sensor of HD02VR-1 for most different structure of LED light like batten light, tri-proof light and ceiling light etc.
• Basic Micorwave Motion Sensor for easily installation and widely using in the smart lighting control industry.
• Detached design which make it happen to install the big part inside of the lighting fittings and expose the smaller part out of the metal plate.
• Automatic light on base on the detection of motion when the ambient light is insufficient
• 4-Pole pluggable clamp terminal (L,N,N,L’) for 1.5mm² cable
• Detection area, hold time and daylight threshold can be precisely set via remote controller.
• IP Rating would be IP20 and 5 years of warranty.

Specifications:

ON/OFF Daylight sensor Detection area

Hold time Warranty of 5 years Remote control

Wirng diagram:

4-pole terminal (Input grey L. N. Output grey N. L’)

Dimensions:

Detached design which make it happen to install the big part inside of the lighting fittings and expose the smaller part out of the metal plate.

Detection coverage:

Max. detection range will be 14m for ceiling mounted; Max. Detection range will be 10m for wall mounted.

Demo:

With sufficient daylight, With insufficient daylight,when

even when motion motion detected,light ON.

detected, light remains OFF.

After last detection,the light will be

dimmed down to the stand-by

dimming level after holdtime.

Applications:

The motion sensor can penetrate most of objects such as glass, wood, plastic but metal. It won’t be affected by ambient temperature, dust and widely applied in office, corridor, fire exit, warehouse, basement and other indoor lighting places for saving energy.