Hot Item 220-240V Input ON/OFF Sensor Switch Microwave Detector With Rod Antenna
Features
Rod antenna, small change on LED PCB
DIP switches, easy to make program
ON/OFF function, turn OFF the light after motion leaves
Daylight Threshold function
Parameter Table
Operating Voltage | 100-240 VAC 50/60Hz |
Switching Capacity | Max.100W |
Microwave Frequency | <0.5W |
Stand-by power | ≤0.5W |
Control Method | ON/OFF |
Programming | DIP Switch |
Detection Angle | 150° Without Glass Cover |
Detection Range | Max.4m/13.12ft |
Mounting Height | Max.ø10m/32.8ft |
Detection Area | 10%/50%/75%/100% |
Hold Time | 5s/90s/5min/15min |
Daylight Threshold | 2Lux/10Lux/50Lux Disable |
IP Rating | IP20 |
Operating Temperature | -25°C~+60°C |
Warranty | 5 Years |
Default Program
Detection area - 100%
Holdtime - 5S
Daylight threshold - disable
Wiring Diagram
Programming
* Daylight Threshold
Check daylight brightness when sensor detects motion, then decide if it turns light ON.
* ON/OFF
When motion is detected, the sensor will switch on the light to 100% brighteness.
After people leave the detection area, light remains 100% brightness for the hold time.
Preset standby period as 0S, sensor turns OFF the light after holdtime.
Specification Download
HD02S-6 1A Rod Antenna 220-240V sensor switch.pdf