Spiral Chute Separator chlorine plastic anti-rust and water proof

Spiral chute, is a comprehensive spiral dressing machine, spiral chute, shaking table, centrifugal dressing machine characteristics of equipment, make mining, the best equipment, especially the seashore, riverside, sand beach, stream road of the sand mining is more ideal.

Device use

This equipment is suitable for sorting iron ore, ilmenite, chromite, pyrite, zirconium, rutile, monazite, phosphenite, tungsten ore, tin ore, tantalum ore, niobium ore and other non-ferrous metals, rare metals and non-metallic ore objects with different specific gravity.This equipment has the advantages of stable separation process, easy control, large allowable variation range of ore concentration, high enrichment ratio and high recovery rate.

Small footprint, less water consumption, simple structure, no power, large handling capacity, simple installation, convenient operation, small investment and quick effect.

Structure:

The spiral chute is composed of a feeding homogenizer, a cross (tripod), a feeding groove, a spiral groove, a cutting groove, a gathering bucket and a groove pillar.

Usage:Calibration will spiral chute stand, vertical line, with metal or wood in the right place, by sand pump will ore to screw on the top two inlet, to join the replenish water, adjust OARS concentration, ore oar natural vortex, down from a high in the rotating velocity cant produce a kind of inertial centrifugal force, with the proportion of ore, the difference of particle size, shape,The gravity and centrifugal force of the swirl separate the ore from the sand,

The concentrate flows into the concentrate bucket and is connected out by pipeline, and the tailings flow into the tailings bucket is connected to the sand pond by pipeline, and then drained away by sand pump, which completes the whole process of beneficiation.

Spiral Chute Separator

The gravity spiral chute is made of light chlorine plastic and it is of anti-rust and water proof. The spiral chute is used for adjusting feeding size of the granularity.

With simple structure and large capacity, the gravity concentrator is of good performance. Chute is one part of the bevel process sorting, the pulp is in certain tilt slant and it will be pushed by stratified flow in order to be layered. The light mineral discharged is called fine concentrate and the heavy minerals which are discharged from the bottom of the slot bottom is yielding tailings.

Working principle

When using the chute when the vertical line need to be calibrated, the ore is sent to the feed mouth. adding additional water. After adjusting the concentration of mineral by adding additional water. The paddle streams down from the high place. In bevel velocity will produce a centrifugal force. Under the action of gravity and centrifugal force, ore and sand will be separated from each other. The tailings then flow into the tailings and the sand is drain away by pump to complete the whole process of the beneficiation.

Technical Data

company show