IK08 Waterproof Streamlined LED Street Light

Technical Parameter:

Product Name : MF-BLX355L-40W MF-BLX420L-60W MF-BLX505L-90W
MF-BLX650L-120W MF-BLX650L-150W MF-BLX650L-200W
System Power : 40W 60W 90W 120W 150W 200W
Luminous Flux : 5200LM±5%, 7800LM±5%, 11700LM±5%, 15600LM±5%, 19500LM±5%, 26000LM±5%
LED QTY : 40pcs 60pcs 96pcs 128pcs 192pcs 192pcs
LED Brand : Lumileds3030
CCT : 3000K, 4000K,5000K, 5700K,6500K
Beam Angle : 85*150°
CRI : ≥80Ra
Power Supply : Meanwell/ Sosen
Input Voltage : AC100-277V/AC220-240V,50/60Hz
Power Factor : ≥0.9
THD : <15%
Material : AL1070&SPCC
Ingress Protection : IP65
IK Grade : IK08
Certificate : CE,RoHS
Operating Temp. : -30℃-45℃
Operating Humidity : 15%-90%RH
Storage Temp. : -40℃-70℃,
Storage Humidity : 10%-95%RH
Warranty Period 5 years

Product details:


Built-in SOSEN driver Laser trademark(OEM)


Butterfly screw safe and convenient Lumileds3030 chips and PC len


IK08 LED Street light Special Characteristic:
1. Distribution Curve Flux

85*150°

2.Product Features:

a.Luminous efficiency up to 130lm/w;
b.Series and Parallel circuit board design, improves the stability of the light;
c.Use high quanlity A1070 aluminum plates as the radiator, with excellent heat dissipation and heat conduction;
d.Use transparent optical PC lens of high light transmittance 92%, with uniform and soft light output;
e.Using constant current LED driver to improve the stability as well as the efficiency of the lamps;
f.Panel beating structure design and streamline appearance;
g.Lampshade can be opened manually for easy maintain;
h.Easy installation, reduce the working time at nigh altitudes;


IK08 LED Street light Dimensions:


40W Size 60W Size 90W Size




120W Size 150/200W Size


Installation Method :

1.Turn off the Electric protection switch.
2.Loosen the butterfly screw (see as figure1) and lift the upper cover(see as figure 2).




3.Lift the supporting steel wire(see as figure 2) and buckle it into the clip hook of supporting fixed.Plate on the upper cover to
keep the upper (see as figure 3).
4.Connect the wire, according to figure 4:
AC Input: L (Brown/Red) - Live, N (Blue/Black) - Zero, (Yellow Green) - Ground.
DC Input: "+" (Brown/Red) - Positive, "-" (Brown/Red) - Negative.

.

5.Put the lamp on the lamp pole and fasten the 4pcs inner screws, as shown in figure 5.
6.Pull the supportign steel wire out of the clio hook(see as figure 6) and press it flat on the lower cover, then close the
upper cover and tighten the butterfly screws(see as figure 6-7).



Package :