100-200tph Pan Mining Equipment Placer Gold And Diamond Wash Plants
Product Description
Rotary scrubber (namely as drum ore scrubber, cylinder stone scrubber or rotary scrubbing machine) is a special washing equipment for cleaning large and difficult-to-wash materials,like high impurity content and sticky mud.
Rotary scrubber has three functions: scrubbing, cleaning and screening. The maximum feed size can reach 200 mm. It mainly carries out preliminary cleaning for raw ore.
Features of Drum Scrubber Washing Machine
Main Application of Drum Scrubber Washing Machine
Rotary scrubber is mainly applied to placer with high mud content and high stickiness. like alluvial gravels, clays and sand. According to the actual demand, the cone screen is installed at the outlet, and the washing sieve can be completed by one machine at the same time.
1.It is a highly economically viable option adequately suitable for small to large volume processing of materials.
2.The screen features various filters for different heavy duty drums that ensure complete separation of fine materials.
3.The design has a end user flexibility that allows for screen replacements depending on mesh sizes.
4.Multiple layers of screen to enhance the sifting process.
5.It features changeable screen plates so that worn out parts can be replaced.
6. Trommel screen has high efficiency and a big capacity for different volumes of materials.
7.The screen is uniquely designed to facilitate higher capacities, provide longer screen life and avoid material clogging.
The trommel screen is equiped with water spray pipe inside drum, with feeding hopper, water pump, diesel generator,ect
Description of the placer gold washing plant
After finishing installtion of the whole plant. Usually use excavator or payloader to feed the river sand into the hopper, then the sand go to the trommel screen. When the rotary trommel screen is rotating, big size more than 8mm sand will be screened out, small sizes less than 8mm will go to the gold centrifugal concentrator or vibrating gold sluice ( usually we recommend concentrator, as it can achieve high recovery rate for different gold particle sizes from 40 mesh to 200 mesh). Following the concentrator is gold sluice with gold blanket, which is used to recover the remaining gold in the concentrator.
Specification
SPECIFICATIONS OF GOLD EXTRACTION EQUIPMENT FOR WASHING GOLD SEPARATOR MACHINE | ||||
Model | GTS20 | GTS50 | MGT100 | MGT200 |
Parameters | ||||
Size /mm | 6000x1600x2499 | 7000*2000*3000 | 8300*2400*4700 | 9800*3000*5175 |
Capacity | 20-40 | 50-80 tph | 100-150 tph | 200-300 tph |
Power | 20 | 30 kw | 50 kw | 80 kw |
Trommel Screen /mm | 1000x2000 | φ1200*3000 | φ1500*3500 | φ1800*4000 |
Sluice Box | 2 set | 2 sets | 3 sets | 4 sets |
Water Supply /m³ | 80m³ | 120 m³ | 240 m³ | 370 m³ |
Recovery Rate | 95% | 98% | 98% | 98% |
Gold sluice with blanket
Shaking table
After collect the gold concentrate fromo the centrifugal concentrator and gold sluice blanket, the most common way is then put it on the shaking table to further improve the gold grade.
Mercury Amalgamation barrel or small ball mill
The gold ore concentrate collected from the shaking table will be put in the small ball mill, or we call it mercury amalgamation barrel. Then it can mix with the mercury and form the gold and mercury mixture.
Electric gold melting furnace
After get the mixture of gold and mercury, you can put it in the elctric gold melting furnace and heat it, then you can get the pure gold bar.
Package&Delivery
After-sales Service
Contact Us