Vertical shaft hammer crusher spare parts/dolomite compound crusher/stone coal compound crusher

The compound crusher is a kind of fine crushing equipment with large crushing ratio. It has no screening grate in the crushing cavity.The particle size of the material can be adjusted arbitrarily, and is not affected by the wear of the plate hammer and the lining plate. Without the screen grate, it is not easy to block when the material has high moisture and mud rate; the elastic adjustment mechanism can be used to automatically discharge the unbreakable material. It will not cause equipment damage; the bearing is horizontally arranged and has a long service life, which can crush materials with high temperature (such as cement clinker).

Working principle

Materials fall into the high-speed rotation impeller from the above of machine, under the action of high-speed centrifugal force, have high-speed impact with another umbrella form materials which flow around the impeller, after they attack each other, then discharged from the bottom, it forms close-circuit and with many times circulation, it can achieve the required product size by screening equipment controlling.

Product Advantages

1.Simple structure low operation cost. using the principle of stone strike stone , smaller wear.
2.High crushing ratio, low energy consumption.
3.It can crush material with high moisture content, humidity can reach 8%.
5.Working noise is less than 75 db, less dust pollution.
6.Suitable for breaking medium hard, especially like clay, limestone and gypsum

Specifications

Compound crusher spare parts

The major wearing parts of the compound crusher is impact plates and hammers. The impact plates are made of high manganese alloy Mn13Cr2, and hammers are made of extremely wearable materials Cr26NiMo.

Customer working site