Mineral Sand Making Machine Sand Making Production Plant With Large Capacity
Introduction:
Sand Making Machine is widely used in crushing pebble, granite, basalt, calcite, quartz, iron ore, limestone, refractory, concrete aggregate, etc. The machine adopts "rock-rock" and "rock-iron" combination of crushing way with higher capacity. The machine is the preferred device in sand industry and full compliance with national standards for construction sand.
Working Princle:
Materials enter impeller with high speed, impact materials around impeller under the function of centrifugal force with high speed, andattack each other. The materials attack each other for many times under whirling current between impeller and machine cover.
Advantages:
1. Simple structure and low operating cost;
2. High crushing ratio with low consumption;
3. Function of fine crushing and crude grinding;
4. Slightly influenced by moisture content of material, and the max moisture content is about 8%;
5. More wearable and easier maintenance;
6. Low working noise (lower than 75 decibel) and light dust pollution.
Technical Parameter :
Model | VCⅡ8622 | |
Capacity(t/h) | Center feeding | 120-220 |
Center and side feeding | 150-290 | |
Max. Feed Size(mm) | 50 | |
Double Motor Power(kW) | 180-220 | |
Overall Dimension/L×W×H(mm) | 4500×2100×3400 | |
Transportation Dimension/ L×W×H(mm) | 4500×2100×2200 | |
Weight(t) | stone strike stone” crushing cavity | 9.2 |
stone strike iron” crushing cavity | 10.5 | |
Thin Oil Lubrication Station | Double Oil Pump Power(kW) | 2×0.37 |
Safety Protection | Double Oil Pump feed each other; Automatic shutdown when no oil return; Water cooling system; Automatic heating in low temperature. | |
Oil Tank Heating Power(kW) | 2 | |
Overall Dimension/L ×W×H(mm) | 820×520×1270 |
Product Picture Show :