RGP100 Model Cost-effective Operation Single Cylinder Hydraulic Cone Crusher Machine

Description

RGP Series Single Cylinder Hydraulic Cone Crusher is a high-energy single-cylinder hydraulic cone crusher optimized by our company on the basis of introducing and absorbing European and American technologies. The cone crusher adopts the design principle of combining lamination and high energy, and the optimized crushing cavity type has the characteristics of large crushing ratio, high efficiency, low energy consumption, and uniform product particle size. This RGP cone crusher can be widely used inused in metal and non-metallic ore, cement, sand, metallurgy and other industries.

Advantages

1. High Reliability: Optimize and improve the product structure, material, processing and assembly process, so as to ensure the reliability of the host machine;

2. High Productivity: Scientific and reasonable crushing chamber type, combined with optimal crushing chamber, reasonable eccentricity, optimal swing frequency and laminating crushing principle, the machine has a large throughput capacity, high productivity, good products shape and low energy consumption;

3. Wide Applicability: According to different feed and finished material size, match the reasonable cavity type, adopt the steel bottom frame or the motor and the main machine to install in one, which can be short time-cost and minimum installation cost.

4.The positive pressure dust-proof system ensures that the lubrication system is always clean, so that the equipment is free from dust pollution during operation, and does not require additional lubrication seals and manual maintenance.

5. Low Operating Cost: specially designed cavity type and lining material make the lining plate more efficient, equipped with positive pressure dust control system to ensure the lubricating oil inside the main engine is free from dust pollution.

6.The special crushing wall and rolling mortar wall design makes the utilization rate of wearing parts higher and greatly reduces the user's investment in spare parts.

Working Principle

When working, the rotation of the motor drives the belt pulley, the transmission shaft and the cone part to swing under the force of the eccentric sleeve, so that the crushing wall of the cone crusher sometimes approaches and sometimes leaves the surface of the white wall fixed on the upper frame. The ore is continuously impacted and crushed in the crushing cavity, and the crushed materials are discharged from the lower part. Adjustment of the size of the discharge port: The first function of the bottom hydraulic cylinder is to adjust the up and down position of the main shaft, thereby adjusting the distance between the movable cone and the outer cone liner. The smaller the distance, the smaller the discharging granularity of the crusher; the larger the distance, the larger the discharging granularity of the crusher. At the same time, choosing different crushing cavity types and choosing different eccentricity can also change the size of the material discharge.

Parameter