• Pure sine wave output
• Friendly user interface;MFD (multi-function display)
• 3 Steps charging
• Overload and short-circuit protection
• Set charging voltage/charging current.
• Battery low voltage shutdown point can be set to 10/10.5/11V
• Set utility priority/ Battery priority
• Set utility input wide/narrow range
• Inverter voltage can be set to 100/110/120;frequency can be set to 50/60Hz
• Set utility charging on/off switch
• Built-in 80A MPPT charger
MODEL | GT33- 1012 TLV | GT33- 1024 TLV | GT33- 1512 TLV | GT33- 1524 TLV | GT33- 2012 TLV | GT33- 2024 TLV | GT33- 3024 TLV | GT33- 3048 TLV | GT33- 4024 TLV | GT33- 4048 TLV | GT33- 5048 TLV | GT33- 6048 TLV | |
Inverter Output | Rated power | 1KW | 1.5KW | 2KW | 3KW | 4KW | 5KW | 6KW | |||||
Power factor | 1 | ||||||||||||
Wave form | Pure sine wave | ||||||||||||
Output voltage RMS | 100V 110V 120VAC(200V 220V 240VAC)±10% | ||||||||||||
Output frequency | 50Hz or 60Hz (±0.3Hz) | ||||||||||||
Inverter efficiency (peak) | >85% | ||||||||||||
Overload | 100%<Load<110% (alarm 5min then stop output ) 110%<Load<125% (alarm 60s then stop output) Load > 125% (alarm 10s then stop output ) | ||||||||||||
Surge rating | 3000VA | 4500VA | 6000VA | 9000VA | 12000VA | 15000VA | 15000VA | ||||||
Capable of starting electric motor | 1P | 1P | 1.5P | 1.5P | 2P | 3P | |||||||
Battery | Battery voltage | 12VDC/24VDC | 24VDC/48VDC | 48VDC | |||||||||
Minimum start voltage | 11VDC/22VDC/44VDC | ||||||||||||
Low battery voltage cut off | (Low voltage fault code04)1010.511V for 12V mode ; 202122V for 24V model ; 404244V for 48v model | ||||||||||||
Low battery voltage alarm |
Add 0.5V battery:(Low battery alarm one second one time) (10 10.5 11V)+0.5VDC for 12V mode (20 21 22V) +1Vdc for 24v model (40 42 44V) +2Vdc for 48v model | ||||||||||||
High battery voltage alarm |
Add +1Vbattery: (high voltage one second one timeafter 30s fault 03) (13.8-14.5V) + 1V for 12V model (27.6-29V) + 2V for 24v model (55.2-58) + 4V for 48v model | ||||||||||||
Save mode | Loads ≤ 40W (110V) 80W (220V) | ||||||||||||
AC Input Mode | Input waveform | Pure sine wave | |||||||||||
Nominal input voltage | 200Vac 220Vac 240Vac | ||||||||||||
Max input voltage | 270Vac MAX | ||||||||||||
Input frequency | 50Hz 60Hz (auto sensing) | ||||||||||||
Efficiency (AC mode) | >95% (load, full battery) | ||||||||||||
Transfer time AC to DC | 15ms(typical) | ||||||||||||
Solar Charger | Maximum PV Array Power | 1250W | 2500W | 1250W | 2500W | 1250W | 2500W | 2500W | 5000W | 2500W | 5000W | 5000W | 5000W |
Maximum PV Charge Current | 80A | ||||||||||||
DC Voltage | 12V/24V | 24V/48V | 24V/48V | ||||||||||
MPPT Range @ Operating Voltage |
16~95VDC @ 12V / 30~130VDC @ 24V | 30~130VDC @ 24V / 60~130VDC @48V |
60~130VDC @48V | ||||||||||
Maximum PV Array Open Circuit Voltage | 100±2Vdc/145±2Vdc | 145±2Vdc | 145±2Vdc | ||||||||||
Maximum Efficiency | >98% | ||||||||||||
Standby Power Consumption | <2W | ||||||||||||
Charge Mode | 12V | 30A | 45A | 60A | |||||||||
24V | 20A | 25A | 30A | 40A | 60A | ||||||||
48V | 20A | 30A | 35A | 40A | |||||||||
Min charge current 10A. Change by every 5A | |||||||||||||
Dimensions | Dimensions (W*H*D) | 277*196*466mm | 277*186*621mm | ||||||||||
Ship Dimensions (W*H*D) | 376*306*592mm | 376*296*747mm | |||||||||||
Warranty | One year (standard), 2 years optional (IP20) |
This split phase inverter TLV series, capacity from 1KW-6KW, DC 12V/24V/48V, it’s applicable to 110VAC/120VAC markets demands, which matches AC 110VAC/120V single phase, or two phase 110VAC/120V 220V/240V; In LCD display, you can set output voltage, frequency, charging voltage, charging current to design best use based on different loads applications; meanwhile, it has already built-in solar charge controller, you can take use of sunshine freely and save electricity bills.
Q one.Do you have MOQ?
Depands on different ideas, Can be negotiated.The larger the quantity is, the competitive the unit price will be.
Q two.Should the customer pay the delivery fee,How much is it?
For the delivery fee,many samples are be requested to be sent,so we must get delivery fee.
If you tell me to use the appointed Express,you will give me your express account or you will pay according to the Express.
If you do not request,I will choose a cheap one in China.
Q three .How about the after sale service?
1)We will always keep the quality the same with the same and if there is something with the quality,we will make compensaton for our coustomers.
2)We will suggest our packing and take charge in our packing,we will keep the goods safe in the delivery.
3)We will trace the goods from the production to selling,we will slove the problems in the selling for our coustomers.
Q four.When can I get a price?
We usually quote within 24hours after we get your inquiry.
Delivery
Our design developers has more than 10 years working experience in solar energy field, all design engineers are working tirelessly to perfect our products to make its always in the leading level. We desire to solve 2B business, provide standardized products, core competencies is high cost performance. we also desire to solve the 2C business and provide personalized products. The core competencies are market, brand and sales channel. We are striving to build KingSun to be an international leading manufacturer of Solar terminal application products.