The centrifuge TRHI22-L has an extraordinary capacity with a maximum of 4x250ml fixed angle rotor, and 4x750ml swing out rotor.
A broad selection of fixed-angle and swing-out rotors is available, along with an extensive range of accessories with buckets and adapters, including bio-safety configurations.
The tube capacities extend from 0.2 ml to 250 ml in fixed-angle rotors and 2 ml to 750 ml in swing-out rotors. Microtiter and deepwell plates can also be centrifuged.
The resulting compatibility with a large number of specimen tubes enables high versatility and allows use for a very wide variety of tasks, including high-throughput applications.
Design
● Metal housing, metal lid, and stainless steel centrifuge chamber are autoclave-able and resistant detergents and disinfection liquids.
● Observations window on lid for speed calibration and noise measurement.
● Microprocessor control with frequency conversion A.C. motor drive
● 7-inch touch screen display the parameters of Speed, Timer, RCF, Rotors, Program(Memory), Acceleration& Deceleration information and Error code information.
● Double layers sealing ring made for the centrifuge lid and the instrument to keep long good sealing.
● Bio-safety: gas-tight rotating head that can be sterilized at high temperature, centrifugal cavity with ultraviolet sterilization function, enter the sterilization state after turning on the machine.
User friendless
● CFC-free refrigerant, temperature sensor inside the chamber, pre-cooling feature, precise temperature control up to – 20°C.
● Programmable and storable, stores up to 1000 programs and provides direct user access with one keystroke save. The stored parameter: combination remains in the memory even after the centrifugation has been switched off.
● Traceability function: USB interface, traceable to more than 1000 sets of centrifugal data.
● Password lock: The centrifuge operating system is equipped with a password to prevent misoperation.
● Provides the 10 acceleration rates and 10 braking ramp, to effectively avoid secondary sedimentation, with better centrifugation effect.
● Automatic lid-locking and holding during rotor run
● Easily exchangeable rotors, special rotor connector which makes it easy to load and unload rotor.
● Automatic troubleshooting with indication of error code and alarm on the screen.
● “Mute”patent technology. Noise level lower than 58 decibel at the highest rotational speed.
● Automatic rpm/rcf conversion
● Automatic rotor identification system, coded rotor identification prevents the rotor from over speeding.
Safety
● Safety and Standards Certification: CE
● Product Safety: EN61010-1 and EN 61010-2-020 Electromagnetic Compatibility: EN 61326-1
● Safety Electrical lid interlock,door can not open when rotor is running and machine won’t run when lid open and error code appears.
● Emergency lid-lock release when power failure(very useful in an unexpected power interruption).
● Gas hinge for lid drop protection.
● Safety protections are made for the over speed, over heating(motor, chamber), imbalance etc to ensure the man machine safety.