High efficiency GPS tracker, support CAT-1 LTE, CANBUS
Product feature:
1. Communication module: Quectel EC200S-CN,CAT1,DL max(10Mbps);UP max :5Mbps
2.Sleeping and wake up mode: by ACC/G-Sensor etc.
3. Red power indicator, green GPS indicator; blue 4G indicator; yellow CAN indicator let you know clearly the device working status.
Product application
1. low-power Bluetooth 4.0 module, high-performance 3-axis gravity and gyroscope sensor and car ECU computer communication module.
2. A intelligent device for fleet management. The vehicle running status, vehicle condition data, vehicle fuel consumption data, driver control data, etc.
3. E9652 is a 4G Qualcomm Netword hardware architecture smart terminal.
Product feature:
Product appearance | ||||||
Type | Detail | Standard configuration | ||||
Dimension | 135.7*82.35*30mm | |||||
Indicator | Indicators | 1:POWER indicator red 2:GPS indicator green 3:4Gindicator blue 4:CAN indicator yellow | ||||
Hardware configuration | ||||||
Type | Detail | Standard configuration | ||||
CPU | model | CPU core 72MHz,M3 kernel,FLASH 512KB,SRAM 64KB | ||||
GNSS | BDS L1/GPS L1 Centimeter-level navigation RTK positioning module | |||||
positioning accuracy | single point:2.5m RTK:0.025m+1ppm CEP50 | |||||
Capture sensitivity | -145dBm | |||||
Tracking sensitivity | -160 dBm | |||||
speed | 0.1m/s | |||||
Initialization time | 90S | |||||
Data update rate | 1Hz(default),2Hz | |||||
Position time | cold start:<32S typical(open sky) hot start:<1S | |||||
Communication module | 4G CAT1 | model | Quectel EC200S-CN,CAT1,DL max(10Mbps);UP max :5Mbps | |||
Frequency | LTE-FDD: B1/B3/B5/B8 LTE-TDD: B34/B38/B39/B40/B41 GSM: 900/1800 MHz do not support (China telecom 2/3G and China mobile 3G) | |||||
battery | built in | 3.6V/550mA NiMH battery | ||||
built in storage | 4MByte | 4Mbyte-SPI Flash,Resume transfer | ||||
OTA | Software | Support OTA updare; platform and protocol provided in advance | ||||
Sleep, wake up | Software | sleep status, wake up by ACC/G-Sensor etc. | ||||
remove alarm | Software | Alram when power cut off or GPS antenna removed | ||||
CAN protocol | ||||||
Type | Detail | Standard configuration | ||||
CAN | CAN | Support ISO15765 & SAEJ1939 | ||||
Interfaces | ||||||
Type | Detail | Standard configuration | ||||
interfaces | SIM card | inside device | ||||
GNSS | GNSS RF SMA *1 | |||||
GPRS | GPRS RF SMA *1 | |||||
power interface | 7PIN male head | |||||
Standard accessory | ||||||
Type | Detail | Standard configuration | ||||
Power cable | power cable | 7PIN female head,1*CAN,1*RS232,B+,B-,ACC,loose wire on the other side | ||||
GPS/BD antenna | external | high precision RTK antenna | ||||
4G antenna | external | Pen antenna | ||||
Installation method | fix by screws | |||||
Reliability | ||||||
Type | Detail | Standard configuration | ||||
Environmental/vibration standard | IP rate | IP65 | ||||
working temperature | -30℃--+70℃ | |||||
storage temperature | -40℃--+85℃ | |||||
humidity | 95%RH(+40℃),48 H | |||||
ESD | Contact discharge:±8KV air discharge: ±15KV | |||||
vibration | EP455 section 5.15.1 |
Service
1. Standard free 1 year warranty for the product;
2. Sample test and debug and technical support;
3. ODM/Customized requirements assessment and quotation;
4. Product ID design ;
5. For certain quantity order, free spare parts support;
6. We have an active team with more than 30 R&D engineers, we will provide qualified service throughout the process.
7. Testing and installation guidance available for all buyers.
8. Free technical training for regional agent if necessary.