Specifications
Brand Name :
Sacontelecom
Model Number :
SA-27-EDW
Certification :
ISO9001, CE
Place of Origin :
China
MOQ :
10pcs
Price :
negotiation
Payment Terms :
L/C, T/T, Western Union, , Paypal
Supply Ability :
5000pcs per Month
Delivery Time :
3 Working Days After Received Payment
Packaging Details :
Carton with PE Foam
Product Name :
Tri-Band Cell Phone Signal Booster
Support System :
EGSM 900MHz DCS 1800MHz 3G 2100MHz
Output Power :
27dBm
Coverage :
1000-5000(m2)
Size :
268mm*58mm*439mm
Weight :
8.5kg
Description

5000m2 Triple Band Mobile Signal Booster 27dBm EGSM 900 DCS 1800 3G 2100

Descriptions:

Booster for cell phone is an active amplifier based on an advanced power amplification technology.

SA-27-EDW is highly effective for poor signal areas such as big buildings, parking lots, tunnels etc.

It amplifies the signal within 5000 m2. It picks up even the lowest signal from the base station.

Indoor Tri Band Signal Repeater (Cell Phone Signal Booster) series is an ideal solution for three wireless

systems in small/medium businesses and home users looking to enhance indoor wireless connectivity. It is

connected via coaxial cable to Donor Antenna and Service Antenna, Donor Antenna is placed outside the

building where it has easy access to BTS signal, and the Service Antenna is placed in the building where it

can extend radio coverage to the blind area. And Automatic Gain Control (AGC) to avoid the Booster from

over saturation, therefore maintaining a high voice quality and avoid adding interference to network. With

good looking & super compact design also make it attractive. Besides, it is easy installation feature is also

for individual customers to install the booster by themselves, and it does not need much professional

knowledge and instrument.

Features:

Cost effective solution for weak signal zones, reduce drop/off calls.

Compact size, low power consumption,

easy installation, great cover.

Expansion and extending of the signal of base station.

Optimization of the quality of the signal and source

Cover about 1000~5000m² without block or obstruct.

High linear design, ALC function design, low interference to BTS.

Support any cellular devices (voice & data & video)

Wide band signal booster, or customize selective band booster.

Support three wireless systems

Extended phone battery life. (Your phone does not need to put out as much power due to improved reception.)

Advantages:

Digital Display Panel, Intelligent mode setting

Smart function called which can be activated via the digital display panel.

Users can choose gain and working system by LED Digital Panel.

Set the technical parameters simple and efficient, this is easier than DIP Switch.

POWER LED Green Normal
Off DC power problem
ALARM LED Green Sys-1,Sys-2 or Sys-3, working in linearity
Red

There are strong input signal or severe self oscillation.

Attention: input signal level is too high or the space of donor antenna and service antenna is not enough. please adjust the gain, If the red light still turning on that means over accepting of donor antenna or strong interference, then please adjust the place of donor antenna.

Off Repeater breaks down, Please re-plug in and check if Alarm LED turns red, if it is, please take measures to keep Alarm LED green; if it maintains off, it means the power break down.

Uplink MGC

Downlink MGC

Digital display panel will show the real-time gain,

“+”increase gain,“-”decrease gain.

Select System Select the different systems when you need, (only for Dual band, Tri band, Quad-band or Five band repeater.)

Specification:

Frequency Range Uplink Downlink
EGSM900+DCS1800+WCDMA 880 - 915/1710-1785/2500-2570/MHz 925 - 960/1805-1880/2620-2690MHz
Max. Gain 75dB 80dB
Max. Output Power 23dBm 27dBm
Band width Wide Band
Manual Gain Control 31dB / 1dB Step
Automatic Gain Control >30dB
Ripple in Band ≤ 8dB
Noise Figure ≤ 6dB
VSWR ≤ 2.0
Intermodulation Products 9KHz~1GHz ≤ -36dBm
1~12.75GHz ≤ -30dBm
Spurious Emission 9KHz~1GHz ≤ -36dBm
1~12.75GHz ≤ -30dBm
Time Delay ≤ 1.5 μs
Frequency stability ≤ 0.01ppm
MTBF > 50000 hours
Impedance 50 ohm
Power Supply AC 90-264V,DC 10V/10A
Power LED Power indicator
Alarm LED Red Self oscillation or Strong input signal
Green Normal
Mechanical Specification
RF Connector N-Female
Switch Power Switch
Cooling Heatsink Convection cooling
Humidity < 90%
Operating Temperature -20°C ~ +55°C
Environment Conditions IP40
Installation Type Wall Installation
Size 268mm*58mm*439mm
Weight < 8.5Kg

Standard Package:

AC90-264V, DC9V/5A power supply adapter 1PCS

AC power cord (EU/US/UK/SA/China standard, etc) 1PCS

Installation kit 1PCS

User manual 1PCS


Recommended Accessories:

Donor antenna: Log Periodic Antenna (9dBi,806-960/1710-2700MHz)

Service antenna: Omni Ceiling Antenna (3dBi,806-960/1710-2700MHz)

5D-FB coaxial cable with connecter (Cable length optional)

Application:

To expand signal coverage or fill signal blind area where signal is weak or unavailable.

Indoor: Hotels, Home, Basements, Shopping Malls, Offices, Parking Lots, Shop.etc.

High Precision 3 Band Cell Phone Signal Enhancer 27dBm With Digital Display

Send your message to this supplier
Send Now

High Precision 3 Band Cell Phone Signal Enhancer 27dBm With Digital Display

Ask Latest Price
Brand Name :
Sacontelecom
Model Number :
SA-27-EDW
Certification :
ISO9001, CE
Place of Origin :
China
MOQ :
10pcs
Price :
negotiation
Contact Supplier
High Precision 3 Band Cell Phone Signal Enhancer 27dBm With Digital Display
High Precision 3 Band Cell Phone Signal Enhancer 27dBm With Digital Display

Shenzhen Sacon Telecom Co., Ltd

Verified Supplier
8 Years
guangdong, shenzhen
Since 2011
Business Type :
Manufacturer, Distributor/Wholesaler, Exporter, Trading Company, Seller
Total Annual :
100,0000-1,000,0000
Employee Number :
10~50
Certification Level :
Verified Supplier
Contact Supplier
Submit Requirement