Wireless Pocket RF Signal Detector Detecting 25MHz-6000MHz Small Size 9V Packed

Descriptions:

1. Wireless tapping is to send the audio or video signal through electromagnetic waves. Wireless tap detector is a machine

designed to detect and fix the position of the hidden wireless tapping device.

2. As the technology of wireless tapping grows, the performance of such devices are also being promoted. They are

more and more difficult to be detected with their small size, low emitting power, complicated modulation, wide range,

high speed, remote controllability and conceal ability. wireless tap detector is is designed to detect and concisely determine

the location of theworking tapping device in the targeted venue. It is one of most advanced portable wirelesssignal detectors.

3. The machine should be held in hand. The SMA socket on the top is for antenna. The two oval holes on the upper right

of the face board are for loudspeaker. In the middle of the left side are 10 grades of LED indicators, the first of which

indicates the power and the others indicate the strength of detected signals. The last one shows the strongest signal. The

knob at the bottom is for power and detecting threshold modulation.

Features:

1. Small size, easy to take and operate;
2. Made of high-intensity and quality anti-jamming alloy, durable;

3. Used to detect the wireless wiretap in car, office, conference room, bathroom, hotel, government and so on;
4. Check the electromagnet in working place;
5. Detect the wireless signal sent by wireless detectaphone or tracker in objective place;
6. Large range of detecting frequency;
7. Good compatibility;
8. High sensitivity, adjustable scope.

Specification: