Ascom 23dBm 1800mhz 2100mhz Dual band Amplifier B1 B3 Mobile Phone Booster
A cell phone signal booster (also known as amplifier or repeater) is made up of three main elements - exterior antenna, amplifier, and interior antenna. They form a wireless system to boost cellular reception. This dual band signal amplifier is for DCS1800mhz and 3G2100mhz, the output power is 23dBm, coverage can be up to 8000 square meters.
Features:
1. 23dBm output power, 80dB high gain, 1800mhz and 2100mhz dual band;
2. 8000 square meters large coverage, indoor used;
3. ALC, AGC function;
4. Frequencies can be customized, such as 900mhz and 1800mhz dual band, 900mhz and 4G 2600mhz dual band, etc;
5. Good exterior, light weight.
6. 1 year warranty;
7. OEM and ODM is available
Specifications:
Frequency Range | Uplink | Downlink | |||
LTE2100 | 1920-1980MHz | 2110-2170MHz | |||
DSC1800 | 1710-1785MHz | 1805-1880MHz | |||
Gain | 75dB±2dB | 80dB±2dB | |||
Output Power | 23dBm±2dBm | 23dBm±2dBm | |||
Band width | Wide Band | ||||
Manual Gain Control | 31dB / 1dB Step | ||||
ALC | >25dB | ||||
Ripple in Band | ≤ 8dB | ||||
Noise Figure | ≤ 6dB | ||||
VSWR | ≤ 2.0 | ||||
Intermodulation | ≤ -40dBc | ||||
Spurious Emission | 9KHz~1GHz | ≤ -36dBm | |||
| 1~12.75GHz | ≤ -30dBm | |||
Time Delay | ≤ 1.5 μs | ||||
Frequency stability | ≤ 0.01ppm | ||||
MTBF | > 50000 hours | ||||
Impedance | 50 ohm | ||||
Power Supply | AC 90-264V,DC 9V/5A | ||||
Power LED | Power indicator | ||||
Alarm LED | Red | Self oscillation or Strong input signal | |||
| Green | Normal | |||
Mechanical Specification | |||||
RF Connector | N-Female | ||||
Switch | Power Switch,Manual Gain Control Switch | ||||
Cooling | Heatsink Convection cooling | ||||
Humidity | < 90% | ||||
Operating Temperature | -10°C ~ +55°C | ||||
Environment Conditions | IP40 | ||||
Installation Type | Wall Installation | ||||
Size | 250*170*53mm | ||||
Weight | 3.5kg |
Packing Lists:
1pcs x dual band signal booster
1pcs x power adaptor ( US, EU, AU, UK)
1pcs x manual