Fume Extractor For Marking Engraving Portable Lightweight Two Suction Arms Universal Wheels Under

Features:

1.Rapid purification by multi-layer filtration

2.Universal smoking arm, random orientation positioning

3.Special alloy impeller, anti-corrosion, stable operation

4, Multilayer filter design,make sure more thorogh purification

Instructions:

Advantages:

1.Multi layer filtration, rapid purification, filter failure sound and light alarm.

2.Low cost basis: as low as 1.85 yuan / day (8 hours / day)

3. Long service life, low cost, continuous 24-hour work, can use 40000 hours (i.e. normal use for eight to ten years)

4, Multilayer filter design,make sure more thorogh purification

5,Brushless DC moter,stable long service life

FAQ:

Q:Can it be used in extremely humid or corrosive environment?

A:No, because in a particularly humid environment, moisture or corrosive gas will damage the filter element and the internal components of the machine; but usually in spring, humid weather, such as "southerly days", will not affect the use.

Q:Can it be used in high temperature environment?

A:The high temperature should be divided into instantaneous high temperature and long-term high temperature, the temperature within 60 degrees can be used; the temperature over 60 degrees for a long time is not recommended, because it may lead to fire.

Q:When the filter element needs to be replaced, will it give an alarm?

A:The indicator light of digital display control panel will flash red light and give out alarm sound.

Q:Can the pipe of smoke and dust move back and forth with the laser head?

A:In principle, it can, but it can't if auxiliary gas is needed

Q:Can water cutting match your purifier?

A:No, because the humidity of the gas and dust inhaled by the air inlet is 40% - 80%, too high humidity will cause the filter element to fail quickly and the circuit inside the machine to be damaged.

Product part picture: