4 Channel 1tb Ssd Waterproof Vehicle Mobile Dvr Wifi Gps 3g Video Input 1280x720 Resolution

Statement

This instruction is applicable for VM-3504-HD 4-ch SSD series MDVR products. Information contained herein may not be technically accurate. If any conflict between the product and the instruction is found during usage, it all depends on the actual product or you can contact the manufacturer. Information contained herein is subject to irregular change without prior notice.

Features

Ø H.264 image compression encoding supported, VM-3504-HD:100fps@720P PAL,

Ø VM-3504-HD support 4 channels analog audio and video recording and playback at the same time.the device up to support 4 analog camera + 1 1080P IPC recording at the same time.

Ø Air video interface is used to provide high reliability and strong anti-seismic property

Ø Built-in 3G/4G network, GPS, WiFi (optional )

Ø Built-in 2.5" SSD, max. 2TB SSD supported,

Ø Good scalability, 1 RS485 interface, 1 RS232 interfaces

Ø 8V-36V wide voltage DC supply, 12V POE power supply supported

Ø operating temperature range -25℃ + 80℃

FAQ:

What's differences between a mobile DVR and a regular DVR?

Anti-Vibration Features:

Mobile DVRs with anti-vibration function which can protect the hard drive installed in the mobile DVR. It will ensure the video storage safety from the movement situation.

GPS:

More advanced mobile DVRs include a GPS which can provide the location and speed information of the vehicle when you check the live video.

Multi-inputs interface:

Mobile DVRs can support multiple of I/O input. such as: ACC on /off of vehicle, doors opening alarms of difference kinds of vehicles. Even signals of left / right turning, over speed alarm etc.

Data Transmission

regular DVR requires LAN connection / and recommended 4G/3G dongles for data transmission. Does not have GPS, or any secondary data storage option.

Mobile DVRs utilizes Wi-Fi, 4G & 3G networks, which enable real-time transmission of data collected from the vehicle in – video, location, speed and inertial measurements.

To extend the service life, please try to install the device in a place where vibration is weak;

To ensure normal heat dissipation, do not install the device in a poorly-ventilated area (such as trunk), and also keep about 15 cm away from other objects on the same level;

The device shall be horizontally installed and protected against water, humidity and lightning; in addition, keep the vehicle still during installation to prevent damage to the device due to falling off;

To ensure safe operation, keep the device, camera, cables and other accessories out of reach of passengers and driver.