Function | Performance | |
System | Language | English / Chinese |
Operation Interface | Graphical menu operation interface(OSD menu) | |
Password security | Permissions setting of administrator & user | |
Video | Video input | 4 channels support CIF/HD1/D1/960H/720P AHD camera |
RJ45 X 1, for IP camera or external Wi-Fi module (802.11ac) | ||
Video output | 2 channels (1 as φ3.5 Phone Jack, 1 at 24pin connector) | |
Video display | Single picture, 4 pictures | |
Signal system | PAL / NTSC | |
Image compression | H.264 Main profile | |
Audio | Audio input | 4 channels |
Audio output | 2 channels (1 as φ3.5 Phone Jack, 1 in the 24pin connector) | |
Record format | Synchronized video & audio recording | |
Recording& Storage | Video resolution | Support 4 channels CIF/HD1/D1/960H/720P AHD camera Video input Support 4 channels 720P AHD+1 channels IP camera Hybrid HD Video input(Coming in soon) |
Video coding | ISO14496-10 | |
Video bit rate | CIF: 1536Kbps ~ 128Kbps, | |
D1: 2048Kbps ~ 400Kbps, | ||
960H: 2048Kbps ~ 400Kbps, | ||
8 grades of image quality optional, Grade1 as best, Grade8 as lowest | ||
Audio bit rate | 8KB/s | |
Storage | 2 SD card storage optional, up to 128 GB / card | |
Alarm | Alarm input | 8 channels, alarm activated by low voltage (<1V) or high voltage (>5V) |
Alarm output | 1 channel, 12V output | |
Communication Ports | RS485 | RS485 ×1 |
RS232 | RS232 ×2 | |
GPS | Built-in GPS module. Real-time geographic coordinates, speed information | |
G-Sensor | Built-in G-Sensor | |
Wireless Communication | 3G | Built-in 3G (HSUPA / HSDPA / WCDMA / EVDO / TD-SCDMA) module optional |
4G | Built-in 4G(TDD-LTE / FDD-LTE) module optional | |
Wi-Fi | Built-in Wi-Fi( 2.4 / 5.8 Ghz) optional | |
Software | PC playback | Video files playback in PC with analysis of the vehicle status |
CMSV6 / IVMS | Wireless real-time video & audio monitoring, GPS, alarm, etc. | |
Software Upgrade | Upgrade through SD card |
Q: What shall we do when a problem that could not be solve occurs to the product?
A: Record product model and software version number and submit detailed problem description to our technical support engineer for analysis. Detailed description will be very helpful to our analysis.
Q: What shall we do when the mobile device has no video output?
A: 1. Check the power status of the device. If only one blue indicator is lit up, it indicates that the device is still in standby mode and not powered on; at the same time, check if red or yellow cable of the main power is supplied normally; If not, the device cannot be started.
2. Check if the display is powered and if the display video is switched to AV status.
3. Check the connection status of the video output cable and display.
4. Check the lock status the mainframe lock; the device can be started only when the lock is locked.