System | Language | English / Chinese |
Operation Interface | Graphical User Interface (OSD menu) | |
Password Security | 2 Levels: Administrator or User | |
Video | Video Input | Supports 4 channels CIF/HD1/D1/960H/720P AHD camera Video input Supports 2-CH 720P AHD + 2-CH 960H analog mixing Video input Supports 1-CH 720P/1080P IPC + 4-CH 960H/D1/CIF Video input Note: 4 channels 720P AHD or 1-CH 720P/1080P IPC + 4-CH 960H Video input will require high speed SD card ( > 80Mb/S, Class 10 or higher) |
Video Output | 2 Channels (Front Panel 3.5mm Jack, Rear Panel on 24 pin I/O Port ) | |
Video Display | Single picture, 1~5 pictures | |
Signal System | PAL / NTSC ( PAL@100 frame 720P/sec; NTSC@120 frame 720P/sec ) | |
Image Compression | H.264 Main profile | |
Audio | Audio Input | 4 Channels |
Audio Output | 2 Channels (Front Panel 3.5mm Jack, Rear Panel on 24 pin I/O Port ) | |
Recording Format | Synchronized A/V recording | |
Recording & Storage | Image Resolution | CIF / HD1 / D1 / 960H / 720P/1080P optional |
Video Coding | ISO14496-10 Industry Standard | |
Video Bit Rate | CIF: 1536Kbps ~ 128Kbps, | |
HD1/D1: 2048Kbps ~ 400Kbps, | ||
960H: 2048Kbps ~ 400Kbps, | ||
720P:4096Kbps ~ 400Kbps | ||
1080P:4096Kbps ~ 400Kbps | ||
Select from 8 Levels of Video Image Quality ranging from 1(Highest) to 8(Lowest) | ||
Audio Bit Rate | 40Kbps | |
Storage | 2 SD Card Slots, Up to 128GB each, Class 10 or higher | |
Alarm | Alarm Input | 8 Channels, Select trigger for either less than 1VDC or greater than 5VDC |
Alarm Output | 1 Channel, 12V output |
Q: 3G/4G signal is intermittent and video is not smooth
A: So far, WCDMA and EVDO has good coverage (4G is desired to be improved). In case where signal is not covered in some mountainous areas or signal is weak due to local network restrictions in some suburban areas, the video may not be smooth or even cannot be viewed. In this case, it is largely affected by the local network; in addition, check if the frame rate for the sub stream is set too high. This may occur when the network condition is poor while the frame rate is high.
Q: Connection is impossible even when WiFi signal is up to -60db
A: If your WiFi is correctly set, connection is generally not a problem when signal intensity is up to -60db. If the device cannot be found within LAN, check if SSID and password are correctly set. Of course, the IP address shall be properly set; in addition, check the encryption type and authentication mode are set to requirements.
Features:
Visionmaster Industrial Co., Ltd. is a leading video surveillance solution provider with global perspective.
We have a professional team of more than 100 people, including more than 30 engineers.
Through our dedication to customer-centric innovation and strong partnerships, we are creating maximum value for international distributors, installers by committing end user competitive mobile surveillance and DVR solutions.
Our solutions have been deployed worldwide among various applications including public transportation, school bus, law enforcement, private fleet, logistics management, railway and metro, mobile media operation, etc. We continue to enjoy rapid and steady growth and would like to invite you to be part of our global success.