LIRUISI Communication Battery 12V Valve Regulated Sealed Lead-Acid Battery LC12-24
Product Introduction:
GFM colloidal sealed batteries are usually composed of positive plate, negative plate, separator, electrolyte and colloid. Among them, the positive plate and the negative plate are made of lead, the separator is used to separate the electrolyte between the positive and negative plates, and the electrolyte is composed of sulfuric acid solution and additives. Colloid, on the other hand, is a polymer that forms a thin film in the electrolyte to prevent electrolyte leakage and oxidation.
LC series 12V valve regulated sealed lead-acid battery series product specifications:
Model | voltage | Capacity 20 hour rate | Dimensions (mm) | Total weight Approx. (kg) | |||
Length (L) | Width (W) | High (H) | Total height (TH) | ||||
LC12-24 | 12 | 24 | 165 | 125 | 175 | 179.5/175 | 9.0 |
Installation, use and maintenance
Storage and installation:
1. The battery that is not in use should be removed from the connecting cable, covered with the pole sheath and wiped clean
2. Maintain and charge the battery every three months, the charging method is the current limiting and constant voltage method, the initial charging current is 0.1CA, and the charging voltage is 2.4V/single cell
3. The battery should be stored in a dry and ventilated place, away from direct sunlight and away from heat sources