1. Extruder

(1) Screw A diameter: 50mm; Rotation speed: 0～72pm.

(2) L:D: 30:1; material of screw: 38CrMoALA ；

(3) Pressure automatic feedback system can adjust the screw speed automatically.

(4) Screw heater: Far infarad

(5) Metering pump: 2 sets, rotation speed 0-45rpm.

(6) Electrical heating spinneret device: 1 set

2. Quenching tank: 2 sets

(1) The tank is made by stainless steel 304.

(2) Air chiller: 10HP

3. The Seven roller stretching unit A

(1) Seven variable diameter rollers, material: steel pipe with hard chrome plating.

(2) Steel cabinet with accurately grind gear makes the roller run smoothly.

(3) Reducer is from Zhejiang Tongli Reducer Co., Ltd.

4. Pressing Hot water tank: 1 set

(1) Tank size: 4000mm

(2) Heating power: 50KW in 2 zones. Electric heating pipe is in the tank.

(3) Water removal device: 2 sets with suction.

5. The seven roller stretching unit B

(1) Seven variable diameter rollers, material: steel pipe with hard chrome plating.

(2) Steel cabinet with accurately grind gear makes the roller run smoothly.

(3) Reducer is from Zhejiang Tongli Reducer Co., Ltd.

6. Hot blast oven for stretching.

(1) Oven length: 4000mm

(2) Heating power: 23kw, electric heating.

7. The Seven roller stretching unit D

(1) Seven variable diameter rollers made by steel pipe with hard chrome plating.

(2) Steel structure box with accurately grind gear makes the rollers run smoothly.

(3) Built-in oil lubrication system which makes the gears runs steady.

8. Single layers hot blast annealing oven: 1 set

(1) Fan power: 2.2KW×2 sets.

(2) Heating power: 23KW

9. The Seven roller stretching unit D

(1) Seven variable diameter rollers, material: steel pipe with hard chrome plating.

(2) Steel cabinet with accurately grind gear makes the roller run smoothly.

(3) Reducer is from Zhejiang Tongli Reducer Co., Ltd.

10. Spindle winder: 8 spindles

(1) Spool Type

(2) The frame transmission is frequency control, driving motor: 2.2kw

(3) Winding motor: 15KG

Specification:

Pictures: