HDPE Monofilament Making Machine for Agriculture nets 0.15-0.35mm colorful

Product Description:

1.90×33 Extruder: 1 set
(1) Screw diameter: 90mm,
Rotation speed of screw: 0～60 rpm.
(2) L:D: 33:1, Material of screw: 38CrMoALA;
The screw is suitable for HDPE virgin.
(3) Manual filter changer/Automatic hydraulic filter:1 set
(4) RKC Pressure automatic feedback system which can adjust the screw speed automatically
(5) Material of barrel heater: Cast aluminium with stainless steel insulation layer which makes the heating evenly and high efficiency.
(6) Electric heating round spinneret: 1 set
(7) Ceramic heating rings for spinneret with SS insulating layer make the heat evenly.
(8) Spinneret components: 2 sets with disassembly support for spinneret discreteness
(9) Metering pump, rotation speed: 0-40 rotation. Frequency control of metering pump speed, driving power: 4KW.
2.Cooling water tank: 1 set
(1) The tank is made by SS 304.
(2) Material of distributing roller: stainless steel
3.Seven roller stretching unit A
(1)Seven viable diameter rollers, there are five rollers are covered with rubber to resist skidding.
(2) Steel structure box with accurately grind gear makes the rollers run smoothly.
(3) Built-out oil lubrication system which makes the gears runs steady.
4.Hot water tank:1 set
(1) Heating power: 27kw, two zones heater.
(2) Double pressure rollers with twin cylinder opening system which is controlled by
electromagnetic valve.
(3) Water removal device.
5.Seven roller stretching unit B
(1) Seven variable diameter rollers with hard chrome plating.
(2) Steel structure box with accurately grind gear makes the rollers run smoothly.
(3) Built-in oil lubrication system which makes the gears runs steady.
6. Single layer hot blast annealing oven: 1 set
(1) Fan power: 2.2KW×2 sets
(2) Heating power: 23KW
(3) Oven length: 5000 mm
(4) Special design of hot air channel which make the temperature evenly.
7.Seven roller stretching unit C.
(1) Seven variable diameter rollers with hard chrome plating.
(2) Steel structure box with accurately grind gear makes the rollers run smoothly.
(3) Built-in oil lubrication system which makes the gears runs steady.
8. Warping winder: 6 sets, 12 spindles
1) The beam size is according to customer’s requirements.
2) Motor: 100kg torque motor
10. Tapered winder: 336 spindles (Option)
(1) Tube is according to the client’s requirements.
(2) The frame transmission is frequency control, driving motor: 2.2kw
(3) The frame transmit by gear rack
(4) Winding motor: 5KG
(5) Max design speed: 0-180m/min

Total installation power: 160KW

Overall size: 43000×1800×2500mm

Total weight: 20T

Parameter:

Pictures: