FSM540~FSM550M10-72H (540W/545W/550W) MBB M10 MONO PERC Half-Cell PV Module

Electrical Characteristics under STC

Mechanical Characteristics

Key Features

• Anti-reflective coated glass to increase module efficiency up to 2% and improve self cleaning ability.
• MBB mono PERC half cell design with less internal power loss to guarantee higher output power and higher module efficiency.
• Half-Cell series PV module offers better temperature-dependent performance, less shading effect on the energy generation, lower risk of hot spot.
• High transmittance tempered glass and cell surface textured design ensure excellent performance in low-light environment.
• Excellent Anti-PID performance guarantee limited power degradation for mass production.
• Split junction boxes with 3*25A diodes to protect electric safety of the whole PV system.
• Mechanical load with high strength: front side max. 5400Pa and rear side max. 2400Pa according to IEC61215 & IEC61730 standards.
• Three channels of EL automatic detections, four times of visual inspections and power test before packing.
• Full production from automatic equipment and production lines to eliminate human errors and scratches.
• Barcode, material and parameter binding data traceable, searchable and freezing.
• Intelligent MES system applied on production lines to reduce waste and ensure higher efficient production.
• Optimal packing solutions for container loading and shipment to ensure products safety during transportation.

Advantages to use High Efficiency Solar Panels

1. Finergy 550W solar panel size was designed as per the maximum manual handling ability. It's available to save labor cost on solar power project constructions.

2. The module efficiency of Finergy 550W solar panel reaches 21.28% exactly. The high efficiency solar panels provide better performance at working. It reduces the BOS cost on solar power projects EPC.

3. The high output current of Finergy 550W solar panel suits to all the inverters in the market.

EL Inspection from Automatic Production Line

Visual Inspection

Packing and Delivery