FSM440~FSM450M72H (440W/445W/450W) MONO PERC 144 Half Cells PV Module

Electrical Characteristics under STC (Irradiance 1000W/m², Cell Temperature 25℃, Air Mass 1.5)

Mechanical Characteristics

Key Features

• 144PCS M6 mono PERC half-cut solar cells with combination of series circuit and parallel circuit.
• 9 busbar mono PERC solar cell to guarantee higher output power and higher module efficiency (up to 20.3%).
• Mono PERC Half-Cell PV module design reduces internal power loss and offers better temperature-dependent performance.
• At least 50% power generation is available even when half of the panel is shaded.
• Excellent Anti-PID performance guarantee limited power degradation for mass production.
• Anti-reflective coating glass to increase module efficiency up to 2% and improve self cleaning ability.
• Full production from automatic equipment and production lines according to IEC61215 & IEC61730 standards.
• Certified to withstand: front side max. 5400Pa; rear side max. 2400Pa.
• Three channels of online EL inspections and power test before packing.
• Material and production information traced and recorded by online MES digital system.
• Optimal vertically packing solution for safety of long distance transportations.
• 12 years product workmanship warranty and 30 years linear power damping warranty

FAQ of FINERGY Solar Panels

Q1: Is it available to OEM for us?

A: FINERGY is a manufacturer with manufacturing plant in WUXI, China. Both OEM and ODM are avilable in the factory. We had rich experience on OEM production for customers. Before production, we have to confirm the BOM list and production craft with customers. The real test report will share with customers in the end.

Q2: What's the production capacity of FINERGY?

A: FINERGY started automatic production since 2016. There're 6 production lines in the workshops. It's available to finish 5,000 pieces of standard solar panels with sole model a day.

Production & QC

Project Reference