FSM335~FSM345M60HB (335W/340W/345W) 120*9BB MONO PERC Half-Cell Full Black PV Module

Electrical Characteristics under STC

Mechanical Characteristics

Key Features

• Anti-reflective coated glass to increase module efficiency up to 2% and improve self cleaning ability.
• 9BB mono PERC half cell design with less internal power loss to guarantee higher output power and higher module efficiency.
• Half-Cell series PV module offers better temperature-dependent performance, less shading effect on the energy generation, lower risk of hot spot.
• High transmittance tempered glass and cell surface textured design ensure excellent performance in low-light environment.
• Excellent Anti-PID performance guarantee limited power degradation for mass production.
• Split junction boxes with high quality diodes to protect electric safety of the whole PV system.
• Mechanical load with high strength: front side max. 5400Pa and rear side max. 2400Pa according to IEC61215 & IEC61730 standards.
• Three channels of EL automatic detections, four times of visual inspections and power test before packing.
• Full production from automatic equipment and production lines to eliminate human errors and scratches.
• Barcode, material and parameter binding data traceable, searchable and freezing.
• Intelligent MES system applied on production lines to reduce waste and ensure higher efficient production.
• Around 0.55% annual power degradation and 30 years linear power damping warranty.
• Optimal packing solutions for container loading and shipment to ensure products safety during transportation.

Extra Care of Full Black Solar Panels from FINERGY

Raw Material QC:

1. Glass: FINERGY sources anti-reflective coated glasses from FLAT Glass or CSG. The QC staffs will take inspections on each glass. Any piece with scratches will be rejected to pass. Otherwise, it will be very clear on full black solar panel.

2. Solar Cell: FINERGY only sources mono PERC solar cells with uniform dark blue color which is only 20% of mass production. Color and characteristics sorting on each cell by machine.

3. Backsheet: FINERGY only sources from Jolywood or 3M who's the top supplier of black backsheet. Both the quality and color are perfect.

4. Aluminum Frames: FINERGY only sources from the fixed supplier with qualified anodized aluminum frame in uniform black color.

Production QC:

1. FINERGY takes performance and visual classification on each solar cell. The similar solar cells are allowed in a panel only.

2. There're 3 channels of EL inspections on automatic production line to ensure the internal quality.

3. FINERGY QC team takes 4 times visual inspections on color matching from solar cells to after lamination. No color mixed solar panel is allowed to send to customers.

4. The frames installation is completed by robots to eliminate scratches on surface.

Automatic Production

Workshop Environment

Certification Trade Mark