FSM360~FSM370M60HB (360W/365W/370W) 120*9BB MONO PERC Half Cell Full Black PV Module
Electrical Characteristics under STC (STC: Irradiance 1000W/㎡, Cell Temprature 25℃, Air Mass 1.5)

Mechanical Characteristics

Technical Descriptions

• 120PCS M6 mono PERC half-cut solar cells with combination of series circuit and parallel circuit to reduce internal power loss.
• 9 busbar mono PERC solar cell with better temperature coefficiencts to provide higher performace and module efficiency.
• Mono PERC Half-Cell PV module design reduces internal power loss and offers better temperature-dependent performance.
• At least 50% power generation is available even when half of the panel is shaded and less hot spot risk.
• Excellent Anti-PID performance guarantee limited power degradation for mass production.
• Anti-reflective coating glass to increase module efficiency up to 2% and improve self cleaning ability.
• Automatic production and products transfer to eliminate human errors and damage or scratches during production.
• Certified to withstand: front side max. 5400Pa; rear side max. 2400Pa.
• Three channels of EL detections, three times visual inspections and power test before packing.
• MES system applied together with automatic production lines to ensure products data information searchable and traceable.
• Optimum vertically packing solution for safety of long distance transportations.
• 12 years product workmanship warranty and 30 years linear power damping warranty

Description of Full Black Solar Panels from FINERGY

Material Sourcing:

1. Glass: FINERGY sources anti-reflective coated glasses from GOLDEN Glass or CSG. The QC staffs will take inspections on each glass. Any piece with scratches will be rejected to use. Otherwise, it will be very clear on full black solar panel.

2. Solar Cell: FINERGY only sources mono PERC solar cells with uniform dark blue color which is only 20% of mass production.

3. Backsheet: FINERGY only sources from Jolywood and 3M who're the top supplier of black backsheet. Both the quality and color are perfect.

4. Aluminum Frames: FINERGY only sources from the fixed supplier with qualified anodized aluminum frame in uniform black color.

Manufacturing Control:

1. FINERGY takes performance and visual classification on each solar cell. The similar solar cells are allowed in a panel only.

2. There're 3 channels of EL inspections on automatic production line to ensure the internal quality.

3. FINERGY QC team takes 4 times visual inspections on color matching from solar cells to after lamination. No color mixed solar panel is allowed to send to customers.

4. The frames installation is completed by robots to eliminate scratches on surface.

Automatic Production

Strict QC

Solar Roof System Case