Technical Parameters:

Laser Type: CO2 sealed laser Laser Power:300W( TWO SIDE CUTTING,two laser tube 150W )

Max Width:1200 x 1600mm(1325 /1218/1224/1212/1290)

Driving Mode:Stepping System Leadshine brand

Laser Tube: Beijing Reci Tube Lence: American lence

Cutting Precision: 0.03mm Repetition precision:≤0.03mm

Maximum Cutting Thickness: 25mm, wooden material, but not metal material.

Protection Gas: Dry and oil-free air

Electricity Needs: single-phase electricity 220V±5% 50HZ 10A

Cutting speed:0-3000mm/min softward setting( 18mm wooden board, 450mm/min)

Numerical Controlled panel: LCD screen, light-touched key-press

Translation Port:USB conncetion, off-line operation

Support Format: DXF,DST,BMP,PLT...etc (auto CAD,CDR)

Control System:SH-Laser precision mould cutting system

Dimension:3260 x 1700 x 1400mm

Working Temperature: 0℃-45℃

PRODUCT CONFIGURATION (PCF)

• Imported Taiwan silver head rail, Taiwan silver rolling poles.
• There is 64MB MEMORY, can be used under off-line condition.
• A set America imported II-IV lens, China Beijing manufactured laser
• China Shandong Manufactured laser power,
• 2 sets exhausting system, self-manufactured cooling water tank
• Professional cutting software can be read CAD,COREDRAW....etc. graphic softwares.
• One set Taiwan manufacdtured air drying machine.(a set oil-water filter)
• , a set common used tools.(including hexagon wrench,light-adjusting board)

Ten Hot Points:

1. Fixed light path (the laser working head is fixed, the board moves)
2. Bi-directional imported precision ball screw driving (more precise than general one), with the error of precision electronic mould of 0.05mm.
3. Cut through 18-25mm at a time, comes with vertical and even sharp board slit, with the speed of cutting one meter line in 2 minutes.
4. High-strength stable mother machine, weight about 2000kg,without distortion after long-term operation.
5. It is always available & no need to wait for on-off, save time & costing.
6. It's easy to adjust light and focusing, can oeprate after basic training.
7. No need auxiliary gas during working(300W power machine type)
8. Simple & clear adjusting technical of knife gap,cutting software can accept AutoCAD,CorelDraw,Adobe Photoshop, very fast to learn and operate.
9. External power of 220v with low consumption cost—the elements (laser tube and lens, etc.) only cost less than 5 Yuan per hour.
10. Full set product output plus strong technical support, offer training for operater,keep no worries for future operation.

Applicable Industry: Mould & Printing & Packing Industry

Applicable Material: Wooden Board and Engraving Board