FS2A THRU FS2M SURFACE MOUNT FAST RECOVERY RECTIFIER Reverse Voltage - 50 to 1000 V Forward Current -2.0 Ampere
MECHANICAL DATA
Case : JEDEC DO-214AC molded plastic body over passivated chip
Terminals : Solder plated, solderable per MIL-STD-750, Method 2026
Polarity : Color band denotes cathode end
Mounting Position : Any
Weight :0.002 ounce, 0.07 grams
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25 C ambient temperature unless otherwise specified. Single phase half-wave 60Hz,resistive or inductive load,for capacitive load current derate by 20%. | |||||||||
MDD Catalog Number | SYMBOLS | FS2A | FS2B | FS2D | FS2G | FS2J | FS2K | FS2M | UNITS |
Maximum repetitive peak reverse voltage | VRRM | 50 | 100 | 200 | 400 | 600 | 800 | 1000 | VOLTS |
Maximum RMS voltage | VRMS | 35 | 70 | 140 | 280 | 420 | 560 | 700 | VOLTS |
Maximum DC blocking voltage | VDC | 50 | 100 | 200 | 400 | 600 | 800 | 1000 | VOLTS |
Maximum average forward rectified current at TL=90 C | I(AV) | 2.0 | Amp | ||||||
Peak forward surge current 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) |
IFSM |
50.0 |
Amps | ||||||
Maximum instantaneous forward voltage at 2.0A | VF | 1.3 | Volts | ||||||
Maximum DC reverse current TA=25 C at rated DC blocking voltage TA=100 C | IR | 5.0 50.0 | mA | ||||||
Maximum reverse recovery time (NOTE 1) | trr | 150 | 250 | 500 | ns | ||||
Typical junction capacitance (NOTE 2) | CJ | 50.0 | pF | ||||||
Typical thermal resistance (NOTE 3) | RqJA | 15.0 | C/W | ||||||
Operating junction and storage temperature range | TJ,TSTG | -50 to +150 | C |
Note:
1. Reverse recovery condition IF=0.5A,IR=1.0A,Irr=0.25A
2. Measured at 1MHz and applied reverse voltage of 4.0V D.C.
3. Thermal resistance from junction to ambient at 0.375”(9.5mm)lead length,P.C.B. mounted
RATINGS AND CHARACTERISTIC CURVES FS2A THRU FS2M