Deep Groove Ball Bearings 6202ZZ 6202-2RS 6202 for High RPM Pump Chrome Steel P6 ABEC 3
Different mechanical equipment has different requirements for bearings. For example, high-speed rotating equipment requires bearings with low friction and high limit speed, while heavy machinery requires bearings that can withstand heavy loads. Because of its good performance and wide applicability, deep groove ball bearings are widely used in various mechanical equipment.
- Premium Quality:Manufactured with chrome steel and high-grade lubricants, ensuring high precision, durability and wear resistance even under high speeds or heavy loads. The dual rubber seals provide excellent protection against corrosion.
- Easy Maintenance: The components are designed for routine maintenance. Lubricant can be reapplied as needed to promote longevity. The steel shield provides added protection for internal parts.
- Wide Range of Applications:With the compact size, these bearings are versatile for various light equipment and instruments requiring precision operation, such as motors, pumps, fans, instruments, etc. The optimized internal design allows for low friction and noise even after prolonged use.
- Excellent Cost-effectiveness:These bearings deliver reliable performance at an affordable price. The premium quality and proven longevity make them a cost-effective option for replacing old bearings or upgrading equipment.
6202ZZ, 6202-2RS, 6202 Ball Bearing Display




Technical Parameters of 6200 Series Equipment Ball bearings:
Basic Bearing No. | Bore d | Outer Diameter D | Width W | Radius r | Basic Load Rating KN | Maximum Run out Speed | Weight kg/pc |
mm | inch | mm | inch | mm | inch | mm | inch | Dynamic | Static | Grease | Oil |
C | CO | r/min | r/min |
627 | 7 | 0.2756 | 22 | 0.8661 | 7 | 0.2756 | 0.3 | 0.012 | 3.35 | 1.4 | 26000 | 34000 | 0.013 |
628 | 8 | 0.3149 | 24 | 0.9448 | 8 | 0.3149 | 0.3 | 0.012 | 4 | 1.59 | 24000 | 32000 | 0.017 |
629 | 9 | 0.3543 | 26 | 1.0236 | 8 | 0.3149 | 0.3 | 0.012 | 4.55 | 1.96 | 22000 | 30000 | 0.02 |
6200 | 10 | 0.3937 | 30 | 1.1811 | 9 | 0.3543 | 0.6 | 0.024 | 5.1 | 2.39 | 19000 | 26000 | 0.032 |
6201 | 12 | 0.4724 | 32 | 1.2598 | 10 | 0.3937 | 0.6 | 0.024 | 6.1 | 2.75 | 18000 | 24000 | 0.037 |
6202 | 15 | 0.5906 | 35 | 1.3780 | 11 | 0.4331 | 0.6 | 0.024 | 7.75 | 3.6 | 17000 | 22000 | 0.045 |
6203 | 17 | 0.6693 | 40 | 1.5748 | 12 | 0.4724 | 0.6 | 0.024 | 9.6 | 4.6 | 16000 | 20000 | 0.066 |
6204 | 20 | 0.7874 | 47 | 1.8504 | 14 | 0.5512 | 1.0 | 0.039 | 12.8 | 6.65 | 14000 | 18000 | 0.106 |
6205 | 25 | 0.9843 | 52 | 2.0470 | 15 | 0.5906 | 1.0 | 0.039 | 14 | 7.85 | 12000 | 16000 | 0.128 |
6206 | 30 | 1.1811 | 62 | 2.4409 | 16 | 0.6299 | 1.0 | 0.039 | 19.5 | 11.3 | 10000 | 13000 | 0.199 |
Applications of Equipment Ball Bearings:

Customization:
-
We can printing your brand (logo,artwork)on the shield or laser engraving your brand on the shield.
-
We can custom your packaging according to your design.
-
All copyright owned by clients and we promised don't disclose any information.
Packing and Shipping:
-
The deep groove ball bearings will be securely packaged individually, or tube packing or packed as customization packing
-
Shipping method is negotiable.
-



ABEC-1 Tolerance Class ABEC-1 (P0)
Inner Ring | Tolerance in um/s |
d mm | Δdmp | 9 | Vdp²)0,1 Diameter Series | 2,3,4 | Vdmp | Kia | ΔBs | Vbs |
over | including | high | low | max | max | max | high | low | max |
1)0.6 | 2.5 | 0 | -8 | 10 | 8 | 6 | 6 | 10 | 0 | -40 | 12 |
2.5 | 10 | 0 | -8 | 10 | 8 | 6 | 6 | 10 | 0 | -120 | 15 |
10 | 18 | 0 | -8 | 10 | 8 | 6 | 6 | 10 | 0 | -120 | 20 |
18 | 30 | 0 | -10 | 13 | 10 | 8 | 8 | 13 | 0 | -120 | 20 |
30 | 50 | 0 | -12 | 15 | 12 | 9 | 9 | 15 | 0 | -120 | 20 |
50 | 80 | 0 | -15 | 19 | 19 | 11 | 11 | 20 | 0 | -150 | 25 |
Outer Ring | Tolerance in um/s |
D mm | Δdmp | VDp2)4)Open Bearings Diameter Series | Capped Bearings2)3) | Vdmp | Kia | ΔBs | Vbs |
9 | 0,1 | 2,3,4 | 2,3,4 |
over | including | high | low | max | max | max | high | low | max |
1)2.5 | 6 | 0 | -8 | 10 | 8 | 6 | 10 | 6 | 15 | Identical to ΔBs and VBs of inner ring of same bearing |
6 | 18 | 0 | -8 | 10 | 8 | 6 | 10 | 6 | 15 |
18 | 30 | 0 | -9 | 12 | 9 | 7 | 12 | 7 | 15 |
30 | 50 | 0 | -11 | 14 | 11 | 8 | 16 | 8 | 20 |
50 | 80 | 0 | -13 | 16 | 13 | 10 | 20 | 10 | 25 |
80 | 120 | 0 | -15 | 19 | 19 | 11 | 26 | 11 | 35 |
120 | 150 | 0 | -18 | 23 | 23 | 14 | 30 | 14 | 40 |
ABEC-3 Tolerance Class ABEC-3 (P6)
Inner Ring | Tolerance in um/s |
d mm | Δdmp | 9 | Vdp²)0,1 Diameter Series | 2,3,4 | Vdmp | Kia | ΔBs | Vbs |
over | including | high | low | max | max | max | high | low | max |
11)0.6 | 2.5 | 0 | -7 | 9 | 7 | 5 | 5 | 5 | 0 | -40 | 12 |
2.5 | 10 | 0 | -7 | 9 | 7 | 5 | 5 | 6 | 0 | -120 | 15 |
10 | 18 | 0 | -7 | 9 | 7 | 5 | 5 | 7 | 0 | -120 | 20 |
18 | 30 | 0 | -8 | 10 | 8 | 6 | 6 | 8 | 0 | -120 | 20 |
30 | 50 | 0 | -10 | 13 | 10 | 8 | 8 | 10 | 0 | -120 | 20 |
50 | 80 | 0 | -12 | 15 | 15 | 9 | 9 | 10 | 0 | -150 | 25 |
Outer Ring | Tolerance in um/s |
D mm | Δdmp | VDp2)4)Open Bearings Diameter Series | Capped Bearings2)3) | Vdmp | Kia | ΔBs | Vbs |
9 | 0,1 | 2,3,4 | 2,3,4 |
over | including | high | low | max | max | max | high | low | max |
1)2.5 | 6 | 0 | -7 | 9 | 7 | 5 | 9 | 5 | 8 | Identical to ΔBs and VBs of inner ring of same bearing |
6 | 18 | 0 | -7 | 9 | 7 | 5 | 9 | 5 | 8 |
18 | 30 | 0 | -8 | 10 | 8 | 6 | 10 | 6 | 9 |
30 | 50 | 0 | -9 | 11 | 9 | 7 | 13 | 7 | 10 |
50 | 80 | 0 | -11 | 14 | 11 | 8 | 16 | 8 | 13 |
80 | 120 | 0 | -13 | 16 | 16 | 10 | 20 | 10 | 18 |
120 | 150 | 0 | -15 | 19 | 19 | 11 | 25 | 11 | 20 |
ABEC-5 Tolerance Class ABEC-5 (P5)
Inner Ring | Tolerance in um/s |
d mm | Δdmp | Vdp²)Diameter Series | Vdmp | Kia | Sd | Sis3) | ΔBs | Vbs |
9 | 0,1,2,3,4 |
over | including | high | low | max | 3 | max | max | max | High | Low | max |
1)0.6 | 2.5 | 0 | -5 | 5 | 4 | 3 | 4 | 7 | 7 | 0 | -40 | 5 |
2.5 | 10 | 0 | -5 | 5 | 4 | 3 | 4 | 7 | 7 | 0 | -40 | 5 |
10 | 18 | 0 | -5 | 5 | 4 | 3 | 4 | 7 | 7 | 0 | -80 | 5 |
18 | 30 | 0 | -6 | 6 | 5 | 3 | 4 | 8 | 8 | 0 | -120 | 5 |
30 | 50 | 0 | -8 | 8 | 6 | 4 | 5 | 8 | 8 | 0 | -120 | 5 |
50 | 80 | 0 | -9 | 9 | 7 | 5 | 5 | 8 | 8 | 0 | -150 | 6 |
Outer Ring | Tolerance in um/s |
D mm | Δdmp | Vdp²)Diameter Series | Vdmp | Kia | SD4) SD15) | Sea4)5) | ΔBs | Vbs |
9 | 0,1,2,3,4 |
over | including | high | low | max |
| max | max | max | High | Low | max |
1)2.5 | 6 | 0 | -5 | 5 | 4 | 3 | 5 | 8 | 8 |
| 5 |
6 | 18 | 0 | -5 | 5 | 4 | 3 | 5 | 8 | 8 | 5 |
18 | 30 | 0 | -6 | 6 | 5 | 3 | 6 | 8 | 8 | 5 |
30 | 50 | 0 | -7 | 7 | 5 | 4 | 7 | 8 | 8 | 5 |
50 | 80 | 0 | -9 | 9 | 7 | 5 | 8 | 8 | 10 | 6 |
80 | 120 | 0 | -10 | 10 | 8 | 5 | 10 | 9 | 11 | 8 |
120 | 150 | 0 | -11 | 11 | 8 | 6 | 11 | 10 | 13 | 8 |
ABEC-7 Tolerance Class ABEC-7 (P4)
Inner Ring | Tolerance in um/s |
d mm | Δdmp | Δds | Vdp²)Diameter Series | Vdmp | Kia | Sd | Sia | ΔBs | Vbs |
7,8,9 | 1,7,2,3,4 |
over | including | high | low | high | low | max | max | max | max | max | High | low | Low | max |
1)0.6 | 2.5 | 0 | -4 | 0 | -4 | 4 | 3 | 2 | 2.5 | 3 | 3 | 0 | -40 | -40 | 2.5 |
2.5 | 10 | 0 | -4 | 0 | -4 | 4 | 3 | 2 | 2.5 | 3 | 3 | 0 | -40 | -40 | 2.5 |
10 | 18 | 0 | -4 | 0 | -4 | 4 | 3 | 2 | 2.5 | 3 | 3 | 0 | -80 | -80 | 2.5 |
18 | 30 | 0 | -5 | 0 | -5 | 5 | 4 | 2.5 | 3 | 4 | 4 | 0 | -120 | -120 | 2.5 |
30 | 50 | 0 | -6 | 0 | -5 | 6 | 4 | 3 | 4 | 4 | 4 | 0 | -120 | -120 | 3 |
50 | 80 | 0 | -7 | 0 | -5 | 7 | 5 | 3.5 | 4 | 5 | 5 | 0 | -150 | -150 | 4 |
Outer Ring | Tolerance in um/s |
D mm | Δdmp | Δds | Vdp²)Diameter Series | Vdmp | Kia | Sd | Sia | ΔBs | Vbs |
7,8,9 | 1,7,2,3,4 |
over | including | high | low | high | low | max | max | max | max | max | High | low | max |
1)2.5 | 6 | 0 | -4 | 0 | -4 | 4 | 3 | 2 | 3 | 4 | 5 | Identical to ΔBs and VBs of inner ring of same bearing | 2.5 |
6 | 18 | 0 | -4 | 0 | -4 | 4 | 3 | 2 | 3 | 4 | 5 | 2.5 |
18 | 30 | 0 | -5 | 0 | -5 | 5 | 4 | 2.5 | 4 | 4 | 5 | 2.5 |
30 | 50 | 0 | -6 | 0 | -6 | 6 | 5 | 3 | 5 | 4 | 5 | 2.5 |
50 | 80 | 0 | -7 | 0 | -7 | 7 | 5 | 3.5 | 5 | 4 | 5 | 3 |
80 | 120 | 0 | -8 | 0 | -8 | 8 | 6 | 4 | 6 | 5 | 6 | 4 |
120 | 150 | 0 | -9 | 0 | -9 | 9 | 7 | 5 | 7 | 5 | 7 | 5 |

Tolerance Data for Vibration of Single Bearing
D | V | V1 | V2 | V3 | V4 |
mm | Low | Medium | High | Low | Medium | High | Low | Medium | High | Low | Medium | High | Low | Medium | High |
3,4 | 80 | 44 | 44 | 60 | 35 | 32 | 48 | 26 | 22 | 31 | 16 | 15 | 28 | 10 | 10 |
5,6 | 110 | 72 | 60 | 74 | 48 | 40 | 58 | 36 | 30 | 35 | 21 | 18 | 32 | 11 | 11 |
7,8,9 | 130 | 96 | 80 | 92 | 66 | 54 | 72 | 48 | 40 | 44 | 28 | 24 | 38 | 12 | 12 |
10,12 | 160 | 120 | 100 | 120 | 80 | 70 | 90 | 60 | 50 | 55 | 35 | 30 | 45 | 14 | 15 |
15 | 210 | 150 | 120 | 150 | 100 | 85 | 110 | 78 | 60 | 65 | 46 | 35 | 52 | 18 | 18 |
17 | 210 | 150 | 120 | 150 | 100 | 85 | 110 | 78 | 60 | 65 | 46 | 35 | 52 | 25 | 25 |
20 | 260 | 190 | 150 | 180 | 125 | 100 | 130 | 100 | 75 | 80 | 60 | 45 | 60 | 25 | 25 |
22,25 | 260 | 190 | 150 | 180 | 125 | 100 | 130 | 100 | 75 | 80 | 60 | 45 | 60 | 30 | 32 |
28 | 260 | 190 | 150 | 180 | 125 | 100 | 130 | 100 | 75 | 80 | 60 | 45 | 60 | 35 | 40 |
30,32 | 300 | 240 | 190 | 200 | 150 | 130 | 150 | 120 | 100 | 90 | 75 | 60 | 70 | 35 | 40 |
35 | 300 | 240 | 190 | 200 | 150 | 130 | 150 | 120 | 100 | 90 | 75 | 60 | 70 | 42 | 45 |
40 | 360 | 300 | 260 | 240 | 180 | 160 | 180 | 150 | 130 | 110 | 90 | 80 | 82 | 50 | 50 |
45 | 360 | 300 | 260 | 240 | 180 | 160 | 180 | 150 | 130 | 110 | 90 | 80 | 82 | 60 | 60 |
50 | 420 | 320 | 320 | 280 | 200 | 200 | 210 | 160 | 160 | 125 | 100 | 100 | 95 | 70 | 70 |
Maximum Vibration Acceleration of Single Bearing
D | Diameter Series(0) | Diameter Series(2) | Diameter Series(3) |
mm | Z | Z1 | Z2 | Z3 | Z | Z1 | Z2 | Z3 | Z4 | Z | Z1 | Z2 | Z3 | Z4 |
3 | 35 | 34 | 32 | 28 | 36 | 35 | 32 | 30 | - | 37 | 36 | 33 | 31 | - |
4 | 35 | 34 | 32 | 28 | 36 | 35 | 32 | 30 | - | 37 | 36 | 33 | 31 | - |
5 | 37 | 36 | 34 | 30 | 38 | 37 | 34 | 32 | - | 39 | 37 | 35 | 33 | - |
6 | 37 | 36 | 34 | 30 | 38 | 37 | 34 | 32 | - | 39 | 37 | 35 | 33 | - |
7 | 39 | 38 | 35 | 31 | 40 | 38 | 36 | 34 | - | - | - | - | - | - |
8 | 39 | 38 | 35 | 31 | 40 | 38 | 36 | 34 | - | - | - | - | - | - |
9 | 41 | 40 | 36 | 32 | 42 | 40 | 37 | 35 | - | - | - | - | - | - |
10 | 43 | 42 | 38 | 33 | 44 | 42 | 39 | 35 | 30 | 37 | 44 | 40 | 37 | 32 |
12 | 44 | 43 | 39 | 34 | 45 | 43 | 39 | 35 | 30 | 47 | 45 | 40 | 37 | 32 |
15 | 45 | 44 | 40 | 35 | 46 | 44 | 41 | 36 | 31 | 48 | 46 | 42 | 38 | 33 |
17 | 46 | 44 | 40 | 35 | 47 | 45 | 41 | 36 | 31 | 49 | 47 | 42 | 38 | 33 |
20 | 47 | 45 | 41 | 36 | 48 | 46 | 42 | 38 | 33 | 50 | 48 | 43 | 39 | 34 |
22 | 47 | 45 | 41 | 36 | 48 | 46 | 42 | 38 | 33 | 50 | 48 | 43 | 39 | 34 |
25 | 48 | 46 | 42 | 38 | 49 | 47 | 43 | 40 | 36 | 51 | 49 | 44 | 41 | 37 |
28 | 49 | 47 | 43 | 39 | 50 | 48 | 44 | 41 | 37 | 52 | 50 | 45 | 42 | 38 |
30 | 49 | 47 | 43 | 39 | 50 | 48 | 44 | 41 | 37 | 52 | 50 | 45 | 42 | 38 |
32 | 50 | 48 | 44 | 40 | 51 | 49 | 45 | 42 | 38 | 53 | 51 | 46 | 43 | 39 |
35 | 51 | 49 | 45 | 41 | 52 | 50 | 46 | 43 | 39 | 54 | 52 | 47 | 44 | 40 |
40 | 53 | 51 | 46 | 42 | 54 | 52 | 47 | 44 | 40 | 56 | 54 | 49 | 45 | 41 |
45 | 55 | 53 | 48 | 45 | 56 | 54 | 49 | 46 | 43 | 58 | 56 | 51 | 47 | 44 |
50 | 57 | 54 | 50 | 47 | 58 | 55 | 51 | 48 | 45 | 60 | 57 | 53 | 49 | 46 |
55 | 59 | 56 | 52 | 49 | 60 | 57 | 53 | 50 | 47 | 62 | 59 | 54 | 51 | 48 |
60 | 61 | 58 | 54 | 51 | 62 | 59 | 54 | 51 | 48 |
| 61 | 56 | 53 | 50
|