Bearing Price of 6203-2RS 6203ZZ Rubber Metal Sealed Silent Bearing for Tranmission Cases Gearbox Motors
Industrial motor ball bearings can be divided into Mini sizes such as model 608 to 6003, 629 to 6203, 6300 to 6303; Medium sizes from 6003 to 6006, 6203 to 6206, 6303 to 6306; and Large sizess. They are characterized by durability and long life.
We, Ningbo Kent Bearing Co., Ltd use high carbon chromium bearing steel (GCr15) for producing high quality deep grooove ball bearings, and we also accept customed material such as stainless steel to make bearings.
Technical Parameters of Industrail Motor (Transmission Cases, Gearbox Motors) Ball Bearings:
6200 Series Bearings Parameters
Basic Bearing No. | Bore d | Outer Diameter D | Width W | Radius r | Basic Load Rating KN | Maximum Run out Speed | Weight kg/pc |
mm | inch | mm | inch | mm | inch | mm | inch | Dynamic | Static | Grease | Oil |
C | CO | r/min | r/min |
627 | 7 | 0.2756 | 22 | 0.8661 | 7 | 0.2756 | 0.3 | 0.012 | 3.35 | 1.4 | 26000 | 34000 | 0.013 |
628 | 8 | 0.3149 | 24 | 0.9448 | 8 | 0.3149 | 0.3 | 0.012 | 4 | 1.59 | 24000 | 32000 | 0.017 |
629 | 9 | 0.3543 | 26 | 1.0236 | 8 | 0.3149 | 0.3 | 0.012 | 4.55 | 1.96 | 22000 | 30000 | 0.02 |
6200 | 10 | 0.3937 | 30 | 1.1811 | 9 | 0.3543 | 0.6 | 0.024 | 5.1 | 2.39 | 19000 | 26000 | 0.032 |
6201 | 12 | 0.4724 | 32 | 1.2598 | 10 | 0.3937 | 0.6 | 0.024 | 6.1 | 2.75 | 18000 | 24000 | 0.037 |
6202 | 15 | 0.5906 | 35 | 1.3780 | 11 | 0.4331 | 0.6 | 0.024 | 7.75 | 3.6 | 17000 | 22000 | 0.045 |
6203 | 17 | 0.6693 | 40 | 1.5748 | 12 | 0.4724 | 0.6 | 0.024 | 9.6 | 4.6 | 16000 | 20000 | 0.066 |
6204 | 20 | 0.7874 | 47 | 1.8504 | 14 | 0.5512 | 1.0 | 0.039 | 12.8 | 6.65 | 14000 | 18000 | 0.106 |
6205 | 25 | 0.9843 | 52 | 2.0470 | 15 | 0.5906 | 1.0 | 0.039 | 14 | 7.85 | 12000 | 16000 | 0.128 |
6206 | 30 | 1.1811 | 62 | 2.4409 | 16 | 0.6299 | 1.0 | 0.039 | 19.5 | 11.3 | 10000 | 13000 | 0.199 |
6207 | 35 | 1.3780 | 72 | 2.8346 | 17 | 0.6693 | 1.1 | 0.043 | 25.7 | 15.3 | 8800 | 10000 | 0.287 |
6208 | 40 | 1.5748 | 80 | 3.1496 | 18 | 0.7087 | 1.1 | 0.043 | 29.1 | 17.8 | 7700 | 9200 | 0.367 |
6209 | 45 | 1.7717 | 85 | 3.3465 | 19 | 0.7480 | 1.1 | 0.043 | 32.5 | 20.4 | 6800 | 8200 | 0.416 |
6210 | 50 | 1.9685 | 90 | 3.5433 | 20 | 0.7874 | 1.1 | 0.043 | 35 | 23.2 | 6100 | 7300 | 0.462 |
6211 | 55 | 2.1654 | 100 | 3.9370 | 21 | 0.8268 | 1.5 | 0.059 | 43.5 | 29.2 | 5500 | 6600 | 0.602 |
6212 | 60 | 2.3622 | 110 | 4.3307 | 22 | 0.8661 | 1.5 | 0.059 | 52.5 | 36 | 5000 | 6000 | 0.789 |
6213 | 65 | 2.5591 | 120 | 4.7244 | 23 | 0.9055 | 1.5 | 0.059 | 58.5 | 40.5 | 4800 | 5800 | 0.99 |
6214 | 70 | 2.7559 | 125 | 4.9213 | 24 | 0.9449 | 1.5 | 0.059 | 63.7 | 45 | 4600 | 5600 | 1.1 |
6215 | 75 | 2.9528 | 130 | 5.1181 | 25 | 0.9843 |
1.5 | 0.059 | 68.9 | 49 | 4400 | 5400 | 1.2 |
Applications of Ball Bearings:

Customization:
-
We can printing your brand (logo,artwork)on the shield or laser engraving your brand on the shield.
-
We can custom your packaging according to your design.
-
All copyright owned by clients and we promised don't disclose any information.
Packing and Shipping:
-
The deep groove ball bearings will be securely packaged individually, or tube packing or packed as customization packing
-
Shipping method is negotiable.
-


Other Technical Data of Ball Bearings

ABEC-1 Tolerance Class ABEC-1 (P0)
Inner Ring | Tolerance in um/s |
d mm | Δdmp | 9 | Vdp²)0,1 Diameter Series | 2,3,4 | Vdmp | Kia | ΔBs | Vbs |
over | including | high | low | max | max | max | high | low | max |
1)0.6 | 2.5 | 0 | -8 | 10 | 8 | 6 | 6 | 10 | 0 | -40 | 12 |
2.5 | 10 | 0 | -8 | 10 | 8 | 6 | 6 | 10 | 0 | -120 | 15 |
10 | 18 | 0 | -8 | 10 | 8 | 6 | 6 | 10 | 0 | -120 | 20 |
18 | 30 | 0 | -10 | 13 | 10 | 8 | 8 | 13 | 0 | -120 | 20 |
30 | 50 | 0 | -12 | 15 | 12 | 9 | 9 | 15 | 0 | -120 | 20 |
50 | 80 | 0 | -15 | 19 | 19 | 11 | 11 | 20 | 0 | -150 | 25 |
Outer Ring | Tolerance in um/s |
D mm | Δdmp | VDp2)4)Open Bearings Diameter Series | Capped Bearings2)3) | Vdmp | Kia | ΔBs | Vbs |
9 | 0,1 | 2,3,4 | 2,3,4 |
over | including | high | low | max | max | max | high | low | max |
1)2.5 | 6 | 0 | -8 | 10 | 8 | 6 | 10 | 6 | 15 | Identical to ΔBs and VBs of inner ring of same bearing |
6 | 18 | 0 | -8 | 10 | 8 | 6 | 10 | 6 | 15 |
18 | 30 | 0 | -9 | 12 | 9 | 7 | 12 | 7 | 15 |
30 | 50 | 0 | -11 | 14 | 11 | 8 | 16 | 8 | 20 |
50 | 80 | 0 | -13 | 16 | 13 | 10 | 20 | 10 | 25 |
80 | 120 | 0 | -15 | 19 | 19 | 11 | 26 | 11 | 35 |
120 | 150 | 0 | -18 | 23 | 23 | 14 | 30 | 14 | 40 |
ABEC-3 Tolerance Class ABEC-3 (P6)
Inner Ring | Tolerance in um/s |
d mm | Δdmp | 9 | Vdp²)0,1 Diameter Series | 2,3,4 | Vdmp | Kia | ΔBs | Vbs |
over | including | high | low | max | max | max | high | low | max |
11)0.6 | 2.5 | 0 | -7 | 9 | 7 | 5 | 5 | 5 | 0 | -40 | 12 |
2.5 | 10 | 0 | -7 | 9 | 7 | 5 | 5 | 6 | 0 | -120 | 15 |
10 | 18 | 0 | -7 | 9 | 7 | 5 | 5 | 7 | 0 | -120 | 20 |
18 | 30 | 0 | -8 | 10 | 8 | 6 | 6 | 8 | 0 | -120 | 20 |
30 | 50 | 0 | -10 | 13 | 10 | 8 | 8 | 10 | 0 | -120 | 20 |
50 | 80 | 0 | -12 | 15 | 15 | 9 | 9 | 10 | 0 | -150 | 25 |
Outer Ring | Tolerance in um/s |
D mm | Δdmp | VDp2)4)Open Bearings Diameter Series | Capped Bearings2)3) | Vdmp | Kia | ΔBs | Vbs |
9 | 0,1 | 2,3,4 | 2,3,4 |
over | including | high | low | max | max | max | high | low | max |
1)2.5 | 6 | 0 | -7 | 9 | 7 | 5 | 9 | 5 | 8 | Identical to ΔBs and VBs of inner ring of same bearing |
6 | 18 | 0 | -7 | 9 | 7 | 5 | 9 | 5 | 8 |
18 | 30 | 0 | -8 | 10 | 8 | 6 | 10 | 6 | 9 |
30 | 50 | 0 | -9 | 11 | 9 | 7 | 13 | 7 | 10 |
50 | 80 | 0 | -11 | 14 | 11 | 8 | 16 | 8 | 13 |
80 | 120 | 0 | -13 | 16 | 16 | 10 | 20 | 10 | 18 |
120 | 150 | 0 | -15 | 19 | 19 | 11 | 25 | 11 | 20 |
ABEC-5 Tolerance Class ABEC-5 (P5)
Inner Ring | Tolerance in um/s |
d mm | Δdmp | Vdp²)Diameter Series | Vdmp | Kia | Sd | Sis3) | ΔBs | Vbs |
9 | 0,1,2,3,4 |
over | including | high | low | max | 3 | max | max | max | High | Low | max |
1)0.6 | 2.5 | 0 | -5 | 5 | 4 | 3 | 4 | 7 | 7 | 0 | -40 | 5 |
2.5 | 10 | 0 | -5 | 5 | 4 | 3 | 4 | 7 | 7 | 0 | -40 | 5 |
10 | 18 | 0 | -5 | 5 | 4 | 3 | 4 | 7 | 7 | 0 | -80 | 5 |
18 | 30 | 0 | -6 | 6 | 5 | 3 | 4 | 8 | 8 | 0 | -120 | 5 |
30 | 50 | 0 | -8 | 8 | 6 | 4 | 5 | 8 | 8 | 0 | -120 | 5 |
50 | 80 | 0 | -9 | 9 | 7 | 5 | 5 | 8 | 8 | 0 | -150 | 6 |
Outer Ring | Tolerance in um/s |
D mm | Δdmp | Vdp²)Diameter Series | Vdmp | Kia | SD4) SD15) | Sea4)5) | ΔBs | Vbs |
9 | 0,1,2,3,4 |
over | including | high | low | max |
| max | max | max | High | Low | max |
1)2.5 | 6 | 0 | -5 | 5 | 4 | 3 | 5 | 8 | 8 |
| 5 |
6 | 18 | 0 | -5 | 5 | 4 | 3 | 5 | 8 | 8 | 5 |
18 | 30 | 0 | -6 | 6 | 5 | 3 | 6 | 8 | 8 | 5 |
30 | 50 | 0 | -7 | 7 | 5 | 4 | 7 | 8 | 8 | 5 |
50 | 80 | 0 | -9 | 9 | 7 | 5 | 8 | 8 | 10 | 6 |
80 | 120 | 0 | -10 | 10 | 8 | 5 | 10 | 9 | 11 | 8 |
120 | 150 | 0 | -11 | 11 | 8 | 6 | 11 | 10 | 13 | 8 |
ABEC-7 Tolerance Class ABEC-7 (P4)
Inner Ring | Tolerance in um/s |
d mm | Δdmp | Δds | Vdp²)Diameter Series | Vdmp | Kia | Sd | Sia | ΔBs | Vbs |
7,8,9 | 1,7,2,3,4 |
over | including | high | low | high | low | max | max | max | max | max | High | low | Low | max |
1)0.6 | 2.5 | 0 | -4 | 0 | -4 | 4 | 3 | 2 | 2.5 | 3 | 3 | 0 | -40 | -40 | 2.5 |
2.5 | 10 | 0 | -4 | 0 | -4 | 4 | 3 | 2 | 2.5 | 3 | 3 | 0 | -40 | -40 | 2.5 |
10 | 18 | 0 | -4 | 0 | -4 | 4 | 3 | 2 | 2.5 | 3 | 3 | 0 | -80 | -80 | 2.5 |
18 | 30 | 0 | -5 | 0 | -5 | 5 | 4 | 2.5 | 3 | 4 | 4 | 0 | -120 | -120 | 2.5 |
30 | 50 | 0 | -6 | 0 | -5 | 6 | 4 | 3 | 4 | 4 | 4 | 0 | -120 | -120 | 3 |
50 | 80 | 0 | -7 | 0 | -5 | 7 | 5 | 3.5 | 4 | 5 | 5 | 0 | -150 | -150 | 4 |
Outer Ring | Tolerance in um/s |
D mm | Δdmp | Δds | Vdp²)Diameter Series | Vdmp | Kia | Sd | Sia | ΔBs | Vbs |
7,8,9 | 1,7,2,3,4 |
over | including | high | low | high | low | max | max | max | max | max | High | low | max |
1)2.5 | 6 | 0 | -4 | 0 | -4 | 4 | 3 | 2 | 3 | 4 | 5 | Identical to ΔBs and VBs of inner ring of same bearing | 2.5 |
6 | 18 | 0 | -4 | 0 | -4 | 4 | 3 | 2 | 3 | 4 | 5 | 2.5 |
18 | 30 | 0 | -5 | 0 | -5 | 5 | 4 | 2.5 | 4 | 4 | 5 | 2.5 |
30 | 50 | 0 | -6 | 0 | -6 | 6 | 5 | 3 | 5 | 4 | 5 | 2.5 |
50 | 80 | 0 | -7 | 0 | -7 | 7 | 5 | 3.5 | 5 | 4 | 5 | 3 |
80 | 120 | 0 | -8 | 0 | -8 | 8 | 6 | 4 | 6 | 5 | 6 | 4 |
120 | 150 | 0 | -9 | 0 | -9 | 9 | 7 | 5 | 7 | 5 | 7 | 5 |

Tolerance Data for Vibration of Single Bearing
D | V | V1 | V2 | V3 | V4 |
mm | Low | Medium | High | Low | Medium | High | Low | Medium | High | Low | Medium | High | Low | Medium | High |
3,4 | 80 | 44 | 44 | 60 | 35 | 32 | 48 | 26 | 22 | 31 | 16 | 15 | 28 | 10 | 10 |
5,6 | 110 | 72 | 60 | 74 | 48 | 40 | 58 | 36 | 30 | 35 | 21 | 18 | 32 | 11 | 11 |
7,8,9 | 130 | 96 | 80 | 92 | 66 | 54 | 72 | 48 | 40 | 44 | 28 | 24 | 38 | 12 | 12 |
10,12 | 160 | 120 | 100 | 120 | 80 | 70 | 90 | 60 | 50 | 55 | 35 | 30 | 45 | 14 | 15 |
15 | 210 | 150 | 120 | 150 | 100 | 85 | 110 | 78 | 60 | 65 | 46 | 35 | 52 | 18 | 18 |
17 | 210 | 150 | 120 | 150 | 100 | 85 | 110 | 78 | 60 | 65 | 46 | 35 | 52 | 25 | 25 |
20 | 260 | 190 | 150 | 180 | 125 | 100 | 130 | 100 | 75 | 80 | 60 | 45 | 60 | 25 | 25 |
22,25 | 260 | 190 | 150 | 180 | 125 | 100 | 130 | 100 | 75 | 80 | 60 | 45 | 60 | 30 | 32 |
28 | 260 | 190 | 150 | 180 | 125 | 100 | 130 | 100 | 75 | 80 | 60 | 45 | 60 | 35 | 40 |
30,32 | 300 | 240 | 190 | 200 | 150 | 130 | 150 | 120 | 100 | 90 | 75 | 60 | 70 | 35 | 40 |
35 | 300 | 240 | 190 | 200 | 150 | 130 | 150 | 120 | 100 | 90 | 75 | 60 | 70 | 42 | 45 |
40 | 360 | 300 | 260 | 240 | 180 | 160 | 180 | 150 | 130 | 110 | 90 | 80 | 82 | 50 | 50 |
45 | 360 | 300 | 260 | 240 | 180 | 160 | 180 | 150 | 130 | 110 | 90 | 80 | 82 | 60 | 60 |
50 | 420 | 320 | 320 | 280 | 200 | 200 | 210 | 160 | 160 | 125 | 100 | 100 | 95 | 70 | 70 |
Maximum Vibration Acceleration of Single Bearing
D | Diameter Series(0) | Diameter Series(2) | Diameter Series(3) |
mm | Z | Z1 | Z2 | Z3 | Z | Z1 | Z2 | Z3 | Z4 | Z | Z1 | Z2 | Z3 | Z4 |
3 | 35 | 34 | 32 | 28 | 36 | 35 | 32 | 30 | - | 37 | 36 | 33 | 31 | - |
4 | 35 | 34 | 32 | 28 | 36 | 35 | 32 | 30 | - | 37 | 36 | 33 | 31 | - |
5 | 37 | 36 | 34 | 30 | 38 | 37 | 34 | 32 | - | 39 | 37 | 35 | 33 | - |
6 | 37 | 36 | 34 | 30 | 38 | 37 | 34 | 32 | - | 39 | 37 | 35 | 33 | - |
7 | 39 | 38 | 35 | 31 | 40 | 38 | 36 | 34 | - | - | - | - | - | - |
8 | 39 | 38 | 35 | 31 | 40 | 38 | 36 | 34 | - | - | - | - | - | - |
9 | 41 | 40 | 36 | 32 | 42 | 40 | 37 | 35 | - | - | - | - | - | - |
10 | 43 | 42 | 38 | 33 | 44 | 42 | 39 | 35 | 30 | 37 | 44 | 40 | 37 | 32 |
12 | 44 | 43 | 39 | 34 | 45 | 43 | 39 | 35 | 30 | 47 | 45 | 40 | 37 | 32 |
15 | 45 | 44 | 40 | 35 | 46 | 44 | 41 | 36 | 31 | 48 | 46 | 42 | 38 | 33 |
17 | 46 | 44 | 40 | 35 | 47 | 45 | 41 | 36 | 31 | 49 | 47 | 42 | 38 | 33 |
20 | 47 | 45 | 41 | 36 | 48 | 46 | 42 | 38 | 33 | 50 | 48 | 43 | 39 | 34 |
22 | 47 | 45 | 41 | 36 | 48 | 46 | 42 | 38 | 33 | 50 | 48 | 43 | 39 | 34 |
25 | 48 | 46 | 42 | 38 | 49 | 47 | 43 | 40 | 36 | 51 | 49 | 44 | 41 | 37 |
28 | 49 | 47 | 43 | 39 | 50 | 48 | 44 | 41 | 37 | 52 | 50 | 45 | 42 | 38 |
30 | 49 | 47 | 43 | 39 | 50 | 48 | 44 | 41 | 37 | 52 | 50 | 45 | 42 | 38 |
32 | 50 | 48 | 44 | 40 | 51 | 49 | 45 | 42 | 38 | 53 | 51 | 46 | 43 | 39 |
35 | 51 | 49 | 45 | 41 | 52 | 50 | 46 | 43 | 39 | 54 | 52 | 47 | 44 | 40 |
40 | 53 | 51 | 46 | 42 | 54 | 52 | 47 | 44 | 40 | 56 | 54 | 49 | 45 | 41 |
45 | 55 | 53 | 48 | 45 | 56 | 54 | 49 | 46 | 43 | 58 | 56 | 51 | 47 | 44 |
50 | 57 | 54 | 50 | 47 | 58 | 55 | 51 | 48 | 45 | 60 | 57 | 53 | 49 | 46 |
55 | 59 | 56 | 52 | 49 | 60 | 57 | 53 | 50 | 47 | 62 | 59 | 54 | 51 | 48 |
60 | 61 | 58 | 54 | 51 | 62 | 59 | 54 | 51 | 48 |
| 61 | 56 | 53 | 50 |